2008/9/6 Michael Yang <[EMAIL PROTECTED]>: > When I connected the projector, I pressed Fn+F8 just same as I do on > Windows, but nothing happened.
You need to either boot with projector connected, in which case all screens will on projector and nothing on monitor. Or build xorg.conf for two screens like mine given below. Under gnome I run command display-properties-gtk and generate this. When you want to turn on projector you have to restart X by simply logging out and in again. HTH -- Regards, Sudev Barar Read http://blog.sudev.in for topics ranging from here to there. My xorg.conf: with snips of irrelevant: Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Generic Keyboard" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Synaptics Touchpad" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Nvidia Default Flat Panel" HorizSync 29.0 - 49.0 VertRefresh 0.0 - 61.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "BenQ FP51G" HorizSync 31.0 - 63.0 VertRefresh 56.0 - 75.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "nvidia" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce Go 6150" BusID "PCI:0:5:0" Screen 0 Option "NoLogo" "True" EndSection Section "Device" Identifier "Videocard1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce Go 6150" BusID "PCI:0:5:0" Screen 1 Option "NoLogo" "True" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" DefaultDepth 24 Option "NoLogo" "True" SubSection "Display" Depth 24 Modes "nvidia-auto-select" EndSubSection EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT: nvidia-auto-select +0+0" EndSection -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
