Thanks! Below is output of lsmod:
...
e100 32232 0
mii 5344 1 e100
...
I try "ifconfig eth0", it says device not found.
--- On Wed, 7/16/08, Nigel Henry <[EMAIL PROTECTED]> wrote:
> From: Nigel Henry <[EMAIL PROTECTED]>
> Subject: Re: how to add ether net card in etch
> To: debian-user@lists.debian.org, [EMAIL PROTECTED]
> Date: Wednesday, July 16, 2008, 2:58 PM
> On Wednesday 16 July 2008 14:51, Serena Cantor wrote:
> > I have etch.
> > Now I add a Ethernet card
> > The card use e100 module in kernel 2.4/sarge
> > but e100 in etch does not seem to work.
>
> Hi Serena. Is the e100 module loaded? Post the ouput of
> lsmod please.
>
> I know that I had some problems with the driver not being
> loaded for my
> Realtek 8139 network card, and had to add 8139too to
> /etc/modules.
>
> If the module is not seen in your lsmod, su to root on the
> CLI, and do a.
> modprobe e100, then check lsmod again.
>
> If the network card is now showing in lsmod, add it to
> /etc/modules, and when
> you reboot, it should be loaded automatically.
>
> All the best.
>
> Nigel.
>
>
>
> --
> To UNSUBSCRIBE, email to
> [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact
> [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
