2008/7/1 Martin Kraus <[EMAIL PROTECTED]>: > Hi, > I'm trying to get Hauppauge Nova-T 500 Dual DVB-T (ID 2040:9950) to work on > lenny. The driver and firmware loads but I get > > dvb-usb: no frontend was attached by 'Hauppauge Nova-T 500 Dual DVB-T' > > and /dev/dvb/adapter0 is missing frontend0 device which I found out is quite > important:) > Did anyone get this card to work? I've googled like hell but to no end. > > thanks for your help > martin > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
Hi Martin, Is the module getting loaded correctly, can you check to see if it shows up under 'lsmod'. you may have to manually load the module and if that works put the module in to the '/etc/modules' file for it to be automatically loaded at boot time. And you might have to load the module with some options eg 'modprode <module> card=<number> tuner=<number>' and then if that works create a '/etc/module.d/<module> file with the relevant info in it. couple ideas to look Regards Dale -- [WWW] http://southernvaleslug.org/ [IRC] #southern-vales.lug on irc.freenode.net "The significant problems we face cannot be solved at the same level of thinking we were at when we created them" Albert Einstein -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
