Hi,
After a update (~3 days ago) my D630 don't halt properly anymore.
When I try to shutdown by gnome or by # shutdown -h 0 my HD isn't finalized
properly and when I start/restart my system I got fsck work because my HD isn't
previous umounted.
My system:
Debian GNU/Linux lenny/sid
uname -a
Linux laia 2.6.24-1-686 #1 SMP Sat Apr 19 00:37:55 UTC 2008 i686 GNU/Linux
I try kernel 2.6.22-3-686 and the problem is the same.
I did this updates (from dpkg.log)
2008-04-22 07:55:54 upgrade console-common 0.7.74 0.7.75
2008-04-22 07:55:56 upgrade libisc32 1:9.4.2-8 1:9.4.2-10
2008-04-22 07:55:56 upgrade libdns32 1:9.4.2-8 1:9.4.2-10
2008-04-22 07:55:56 upgrade libisccc30 1:9.4.2-8 1:9.4.2-10
2008-04-22 07:55:56 upgrade libisccfg30 1:9.4.2-8 1:9.4.2-10
2008-04-22 07:55:56 upgrade libbind9-30 1:9.4.2-8 1:9.4.2-10
2008-04-22 07:55:57 upgrade liblwres30 1:9.4.2-8 1:9.4.2-10
2008-04-22 07:55:57 upgrade bind9-host 1:9.4.2-8 1:9.4.2-10
2008-04-22 07:55:57 upgrade dnsutils 1:9.4.2-8 1:9.4.2-10
2008-04-22 07:55:57 upgrade avahi-autoipd 0.6.22-2 0.6.22-3
2008-04-22 07:55:57 upgrade libdbus-1-3 1.1.20-1 1.2.1-1
2008-04-22 07:55:57 upgrade dbus 1.1.20-1 1.2.1-1
2008-04-22 07:55:58 upgrade libavahi-common-data 0.6.22-2 0.6.22-3
2008-04-22 07:55:58 upgrade libavahi-common3 0.6.22-2 0.6.22-3
2008-04-22 07:55:58 upgrade libavahi-core5 0.6.22-2 0.6.22-3
2008-04-22 07:55:58 upgrade avahi-daemon 0.6.22-2 0.6.22-3
2008-04-22 07:55:58 upgrade libgtkhtml3.14-19 3.18.0-1 3.18.1-1
2008-04-22 07:56:00 upgrade gtkhtml3.14 3.18.0-1 3.18.1-1
2008-04-22 07:56:00 upgrade libavahi-client3 0.6.22-2 0.6.22-3
2008-04-22 07:56:00 upgrade libavahi-compat-libdnssd1 0.6.22-2 0.6.22-3
2008-04-22 07:56:00 upgrade libavahi-glib1 0.6.22-2 0.6.22-3
2008-04-22 07:56:00 upgrade libavahi-qt3-1 0.6.22-2 0.6.22-3
2008-04-22 07:56:00 upgrade libgl1-mesa-glx 7.0.3~rc2-2 7.0.3-1
2008-04-22 07:56:01 upgrade libglu1-mesa 7.0.3~rc2-2 7.0.3-1
2008-04-22 07:56:01 upgrade xsane 0.995-2 0.995-3
2008-04-22 07:56:01 upgrade xsane-common 0.995-2 0.995-3
2008-04-22 08:39:28 install debian-multimedia-keyring <nenhuma> 2007.02.14
2008-04-22 08:49:52 install gcc-3.3-base <nenhuma> 1:3.3.6-15
2008-04-22 08:49:52 install libstdc++5 <nenhuma> 1:3.3.6-15
2008-04-22 08:49:52 install w32codecs <nenhuma> 1:20071007-0.1
2008-04-24 07:20:01 upgrade pciutils 1:2.2.10-1 1:2.2.10-2
2008-04-24 07:20:01 upgrade ca-certificates 20070303-0.1 20080411
2008-04-24 07:20:02 upgrade libgstreamer0.10-0 0.10.19-1 0.10.19-3
2008-04-24 07:20:02 upgrade gstreamer0.10-tools 0.10.19-1 0.10.19-3
2008-04-24 07:20:02 upgrade libhtml-tagset-perl 3.20-1 3.20-2
2008-04-24 07:20:02 install python-gst0.10 <nenhuma> 0.10.11-1
2008-04-24 07:20:03 upgrade python2.5 2.5.2-2 2.5.2-3
2008-04-24 07:20:04 upgrade python2.5-minimal 2.5.2-2 2.5.2-3
2008-04-24 07:20:05 install libbrlapi0.5 <nenhuma> 3.9-6
2008-04-24 07:20:05 upgrade qemu 0.9.1-3 0.9.1-4
2008-04-24 07:20:09 upgrade rhythmbox 0.11.5-1 0.11.5-2
2008-04-25 07:35:57 upgrade linux-image-2.6.24-1-686 2.6.24-5 2.6.24-6
2008-04-25 07:36:11 install libcwidget3 <nenhuma> 0.5.11-1
2008-04-25 07:36:11 install libxapian15 <nenhuma> 1.0.5-1
2008-04-25 07:36:11 install libept0 <nenhuma> 0.5.17
2008-04-25 07:36:11 upgrade aptitude 0.4.10-1+b2 0.4.11.2-1
2008-04-25 07:36:13 upgrade manpages 2.79-2 2.79-3
2008-04-25 07:36:14 upgrade python-central 0.6.1 0.6.5
2008-04-25 07:36:14 upgrade libdbus-glib-1-2 0.74-1 0.74-2
2008-04-25 07:36:14 upgrade libelfg0 0.8.6-4 0.8.10-1
2008-04-25 07:36:14 upgrade linux-headers-2.6.24-1-686 2.6.24-5 2.6.24-6
2008-04-25 07:36:17 upgrade linux-headers-2.6.24-1-common 2.6.24-5 2.6.24-6
2008-04-25 07:36:20 upgrade linux-libc-dev 2.6.24-5 2.6.24-6
2008-04-25 07:36:21 upgrade linux-source-2.6.24 2.6.24-5 2.6.24-6
After the shutdown command the system close X (gnome) and stop for a few seconds
on a screen like a console (ctrl+alt+f2) with:
(... a lot of shutdown messages and ...)
/dev/sda:
setting Advanced Power Management level to 0xfe (254)
/dev/hda:
setting Advanced Power Management level to 0xfe (254)
HDIO_DRIVE_CMD failed: Input/output error
laia login:
(laia is my computer name)
and suddenly power off in this point!
I try to set the hparm manually and got this one:
marcelo <at> laia:~$ sudo hdparm -I /dev/hda
/dev/hda:
ATAPI CD-ROM, with removable media
Model Number: TSSTcorp DVD+/-RW TS-L632H
Serial Number:
Firmware Revision: D300
Standards:
Supported: CD-ROM ATAPI-3 -4 -5 -6 -7
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=383ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* Power Management feature set
* PACKET command feature set
* DEVICE_RESET command
* NOP cmd
HW reset results:
CBLID- below Vih
Device num = 0 determined by CSEL
marcelo <at> laia:~$
marcelo <at> laia:~$ sudo hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: FUJITSU MHW2120BJ FFS G2
Serial Number: K321T8126089
Firmware Revision: 0085001C
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions,
SATA Rev
2.5; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
Used: ATA-8-ACS revision 3c
Supported: 8 7 6 5
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 234441648
LBA48 user addressable sectors: 234441648
device size with M = 1024*1024: 114473 MBytes
device size with M = 1000*1000: 120034 MBytes (120 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Advanced power management level: disabled
Recommended acoustic management value: 254, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
Disable Data Transfer After Error Detection
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Free-fall Control feature set
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
120min for SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000e04179de19
NAA : 5
IEEE OUI : e
Unique ID : 04179de19
Checksum: correct
marcelo <at> laia:~$
On kernel log I can see:
kernel: hda: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
kernel: hda: drive_cmd: error=0x04 { AbortedCommand }
laia kernel: ide: failed opcode was: 0xec
After update my system forgot that I have DVD/CD recorder on /dev/hda and kill
the power suddenly.
Could you help me on this issue?
Thank you a lot
Marcelo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
