Folk,
My LAN has a Debian router, joule, and two subordinate
machines, curie and heaviside. The three connect to an
old Linksys 10Base-T hub. joule connects to a
cable modem through a second NIC and runs
ipmasq.
Currently I want to add a third NIC to joule,
remove the hub and connect each of curie and heaviside
to a NIC in joule using a crossover cable.
All appears OK except that curie and heaviside fail to
communicate with each other.
The output of cat /etc/network/interfaces
and netstat -r follow.
Thanks for any ideas, ... Peter E.
joule:~# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
auto lo eth0 eth1 eth2
# The loopback network interface
iface lo inet loopback
# The primary network interface
iface eth0 inet dhcp
#iface eth0 inet static
# address 137.82.26.91
# netmask 255.255.255.0
# gateway 137.82.26.254
# The interface to curie
iface eth1 inet static
address 172.23.4.1
netmask 255.255.255.0
up route add -host 172.23.4.4 dev $IFACE
down route del -host 172.23.4.4 dev $IFACE
# The interface to heaviside
iface eth2 inet static
address 172.23.4.1
netmask 255.255.255.0
up route add -host 172.23.4.3 dev $IFACE
down route del -host 172.23.4.3 dev $IFACE
joule:~# netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
heaviside * 255.255.255.255 UH 0 0 0 eth2
curie * 255.255.255.255 UH 0 0 0 eth1
172.23.4.0 * 255.255.255.0 U 0 0 0 eth1
172.23.4.0 * 255.255.255.0 U 0 0 0 eth2
24.108.32.0 * 255.255.252.0 U 0 0 0 eth0
default 24.108.32.1 0.0.0.0 UG 0 0 0 eth0
Desktops.OpenDoc http://carnot.yi.org/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
