Douglas A. Tutty wrote:
On Sun, Feb 24, 2008 at 07:14:04PM +0100, eric s wrote:
Douglas A. Tutty wrote:
On Sun, Feb 24, 2008 at 02:31:52PM +0100, eric s wrote:
the serial port do not get created at start up?
>
To what script are you referring? There is no startup script to create
serial devices. They are there already in /dev
crw-rw---- 1 root dialout 4, 64 Feb 24 11:06 ttyS0
crw-rw---- 1 root dialout 4, 65 Feb 24 10:35 ttyS1
crw-rw---- 1 root dialout 4, 66 Feb 24 10:35 ttyS2
crw-rw---- 1 root dialout 4, 67 Feb 24 10:35 ttyS3
well, the /dev/ttyS* didn't exists so I created /dev/ttyS* using ./MAKEDEV
and here is what I got:
# setserial -ag /dev/ttyS*
/dev/ttyS0, Line 0, UART: unknown, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
/dev/ttyS1, Line 1, UART: unknown, Port: 0x02f8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
/dev/ttyS2, Line 2, UART: unknown, Port: 0x03e8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
/dev/ttyS3, Line 3, UART: unknown, Port: 0x02e8, IRQ: 3
Baud_base: 9600, close_delay: 50, divisor: 0
closing_wait:
then I connected a bluetooth device and got the data in as serial line
9600, and can see the data fine in
cat /dev/rfcomm1
Well, /dev/rfcomm1 isn't a standard serial port.
I created a symlink
ln -s /dev/rfcomm1 /dev/ttyS3
but all I got at cat /dev/ttyS3
is
cat: /dev/ttyS3: Input/output error
You complained about lack of standard serial port. Perhaps your box has
them or not, but they you're connecting to something other than a
standard serial port. These are device nodes, they tell (by their major
number) the kernel what device module is responsible for the I/O and by
their minor number which device. Setserial allows you to then tell the
kernel what settings to use for each device.
You should have told us up front that you are having trouble with
bluetooth. I've always worn a face mask and keep my mouth shut when its
below -40C so I have never had a frozen tooth. :)
Seriously, I hope someone who has at least seen a bluetooth device can
offer some help. Perhaps change the thread name.
Doug.
sorry about taking the question to far ahead, but the question was
really /dev/ttyS* related, since I suspect the ports are not set up
correctly. Is the Port:# looking correct?
This is because I can't open a serial /dev/ttyS* from any apps, all I
receive is a termios.h error, so from that I think its something the matter
-eric
"I seriously want to retrieve my mind from the gutter soon ;)"
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
