Dear Beny, I had an nx6325 notebook. ACPI features can be solved in 2 ways. First is very annoying and difficult that to edit the DSDT table. You can find more at http://acpi.sourceforge.net/dsdt/index.php
I think it's quite difficult and it's just fades the problems. (Strange that HP was one of the founders of the ACPI and they don't make 100% compatible notebooks for it :)) Of course in windows you don't see the problems... Second solve is to use newer kernel. If i remember good from 2.6.21 it's worked good. So for sure use 2.6.23 kernel and it should be ok :). Brgds, Gabor 2008/2/15, Beny Spira <[EMAIL PROTECTED]>: > > Hi there > > My compaq nx6120 runs a Debian 4.0r2 and a kernel 2.6.18-6-686. > Most features work nicely, but there are a couple of quite annoying > problems I couldn't find a clear answer: > > 1) My mouse very often dies and dmesg gives the following message: > > uhci_hcd 0000:00:1d.0: host controller process error, something bad > happened! > uhci_hcd 0000:00:1d.0: host controller halted, very bad! > uhci_hcd 0000:00:1d.0: HC died; cleaning up > usb 1-1: USB disconnect, address 3 > > It is interesting that this usually happens when i slightly move the > laptop on the table. Moving the mouse or its cable does not cause it > to hang. I've seen several posts with similar problems, but not a good > solution to it. > > 2) ACPI isn't working. I can't see the battery details and the > computer does not completely shutdown. It stops at "System is halted" > and hangs. > > I would appreciate any help on these matters. > Thanks, > Beny > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > >
