On Tue, Nov 20, 2007 at 21:20:15 -0500, Paul Cartwright wrote:
> On Tue November 20 2007, Florian Kulzer wrote:
> > That looks OK to me.
> >
> > Which output do you get for these three commands:
[...]
> $ awk '/Section "(InputDevice|ServerFlags)"/,/EndSection/' /etc/X11/xorg.conf
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "kbd"
> Option "CoreKeyboard"
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "us"
> Option "XkbVariant" "us"
> EndSection
[...]
> [EMAIL PROTECTED]:~$ xmodmap
> xmodmap: up to 2 keys per modifier, (keycodes in parentheses):
>
> shift Shift_L (0x32), Shift_R (0x3e)
> lock Caps_Lock (0x42)
> control Control_L (0x25), Control_R (0x6d)
> mod1 Alt_L (0x40), Alt_R (0x71)
> mod2 Num_Lock (0x4d)
> mod3
> mod4
> mod5 Scroll_Lock (0x4e)
My mod4/5 looks different:
mod4 Super_L (0x7f), Hyper_L (0x80)
mod5 Mode_switch (0x5d), ISO_Level3_Shift (0x71), ISO_Level3_Shift
(0x7c)
For the rest I see the same, so I guess it is OK.
> [EMAIL PROTECTED]:~$ xmodmap -pk | grep '(F[0-9]\+)'
> 67 0xffbe (F1) 0xffca (F13)
> 68 0xffbf (F2) 0xffcb (F14)
> 69 0xffc0 (F3) 0xffcc (F15)
> 70 0xffc1 (F4) 0xffcd (F16)
> 71 0xffc2 (F5) 0xffce (F17)
> 72 0xffc3 (F6) 0xffcf (F18)
> 73 0xffc4 (F7) 0xffd0 (F19)
> 74 0xffc5 (F8) 0xffd1 (F20)
> 75 0xffc6 (F9)
> 76 0xffc7 (F10)
> 95 0xffc8 (F11)
> 96 0xffc9 (F12)
The switching will only work if you get something like this:
$ xmodmap -pk | grep '(F[0-9]\+)'
67 0xffbe (F1) 0x1008fe01 (XF86_Switch_VT_1)
68 0xffbf (F2) 0x1008fe02 (XF86_Switch_VT_2)
69 0xffc0 (F3) 0x1008fe03 (XF86_Switch_VT_3)
70 0xffc1 (F4) 0x1008fe04 (XF86_Switch_VT_4)
71 0xffc2 (F5) 0x1008fe05 (XF86_Switch_VT_5)
72 0xffc3 (F6) 0x1008fe06 (XF86_Switch_VT_6)
73 0xffc4 (F7) 0x1008fe07 (XF86_Switch_VT_7)
74 0xffc5 (F8) 0x1008fe08 (XF86_Switch_VT_8)
75 0xffc6 (F9) 0x1008fe09 (XF86_Switch_VT_9)
76 0xffc7 (F10) 0x1008fe0a (XF86_Switch_VT_10)
95 0xffc8 (F11) 0x1008fe0b (XF86_Switch_VT_11)
96 0xffc9 (F12) 0x1008fe0c (XF86_Switch_VT_12)
Try to change your xorg.conf to:
Option "XkbVariant" ""
and restart X. (You can also comment out that line completely.)
You can also try to run
xmodmap -e "keycode 67 = F1 XF86_Switch_VT_1"
while X is running and check if this restores CTRL-ALT-F1 switching to
tty1.
--
Regards, | http://users.icfo.es/Florian.Kulzer
Florian |
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
