Sebastiaan (<[EMAIL PROTECTED]>) wrote:
>> It has been a struggle, but "Woody" is installed using the bf24
>> But I'm hitting a wall with the cd burning.
>> I get to the part in the Howto where you test for the modules:
>>
>> ide-cd
>> ide-scsi
>> loop
>> scsi_mod
>> sr_mod
>> iso9660
>>
>> and my good computer says they are nowhere to be found.
How did you search for them? If the Kernel is installed correctly, the
ide-scsi and loop module should be somewhere in
/lib/modules/2.4.18-bf2.4. Try "modprobe ide-scsi" to see if it can be
loaded.
> perhaps they are already compiled into the kernel. If you have a SCSI
> burner, you could start burning right away. IDE drives still need SCSI
> emulation as far as I know. You can do this by adding 'hdc=scsi' to
> the kernel boot parameters (with hdc being your burner of course) or
> with lilo:
> image=/boot/vmlinuz
> label=Linux
> read-only
> append="hdc=scsi"
>
> Then run 'cdrecord -scanbus' as root to see if your burner is listed.
> If so, you can start burning.
The bf2.4 Kernel has the ide-cd, scsi-mod and sr_mod drivers built in.
The ide-scsi and loop drivers are built as modules. And the iso9660
file system driver seems to be called isofs (and also to be built into
the kernel). "modprobe ide-scsi" works fine for me with that kernel.
best regards
Andreas Janssen
--
Andreas Janssen
[EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674
Registered Linux User #267976
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
