Dancing Fingers wrote:
Hi guys,
I have an dual-head ATI AGP card that I had working great on my AMD64
box, except for a square mouse one side (which I could live with. But
I wanted to view Flash stuff which isn't supported in AMD64 yet so I
put the card in my Athlon box. I copied over the same xorg.conf file
but all I get is 2 views of the same thing.
Any ideas?
Thanks.
Chris
I see you've fixed it but the other option is to use MergedFB something
like this, you'll want to adjust the timings for your screens.
Section "Device"
Identifier "ATI Rad"
Driver "ati"
BusID "PCI:1:0:0"
Option "AGPMode" "4" #Set AGP data transfer rate, only
used when DRI is enabled, 1 2 4 8
# Option "AGPFastWrite" "FALSE" # speeds things up but causes a
lot pf problems, only used when DRI is enabled
Option "EnablePageFlip" "TRUE" # page flipping for 3D accel,
increases performance but doesn't work in rare cases, hence default is off.
Option "RenderAccel" "on"
Option "ColorTiling" "on"
# Option "AccelMethod" "EXA" # Valid options are XAA and EXA, XAA
old, reliable & default, EXA newer faster
# Option "FBTexPercent" "0" # with EXA 0 may be faster but may
cause probs, XAA no real efect, default 50
Option "DynamicClocks" "TRUE" # may save power may slow 3D
don't know if it works on PCs, is for laptops
Option "SubPixelOrder" "RGB"
Option "MergedFB" "true" #Enable MergedFB function
# Option "MonitorLayout" "LCD, CRT" # Use LCD and CRT even if you
have 2 LCD's or CRT's
Option "CRT2Hsync" "30-83" #Horizontal Sync of the Hyundai
Option "CRT2VRefresh" "50-60" #Vertical Refresh rate of the
Hyundai
Option "CRT2Position" "LeftOf" #Physical location of your
secondary monitor in relationship to your primary monitor.
Option "MergedXinerama" "TRUE" # Simliate Xinerama default true
# Option "MergedXineramaCRT2IsScreen0" "TRUE" # set the right or top
screen to 0 default FALSE
# Option "MergedDPI" "85" # tinker with DPI but remove any dpi stuff
from /etc/X11/xinit/xserverrc
Option "MetaModes" "1280x1024-1280x1024" #Monitor Resolutions
for Primary-Secondary monitors
EndSection
Section "Monitor"
Identifier "samsung"
Option "DPMS"
HorizSync 30-81
VertRefresh 56-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Rad"
Monitor "samsung"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
