Le Mercredi 30 Juillet 2003 02:40, Roberto Sanchez a écrit : > --- [EMAIL PROTECTED] escribió: > > so, after regenerating modpost, I succeed in compiling nvnet > > the patch which work (at least with test2-mm1) is here : > > http://penna.dyn.dhs.org/nvnet.2.5-1.diff > > Can you give me a step-by-step on this, because I patched my nforce driver > and compled it with -test1 and -test2, but it wouldn't work becuase it > would hang the machine anytime I tried bring up the interface with DHCP, > and if I configured it statically, the network was still unreachable. > > Also, I noticed that my CPU utilization was about 50-75% (when idle) > whenever I would run 2.6.0-testX. Have you also seen this? I can't figure > it out, as my machine (Athlon XP+ 2500) runs fine under a 2.4.20 and my > laptop (Pentium III 700) runs the 2.6.0-test2 just great without ridiculous > amounts of CPU utilization while idle. > > -Roberto >
step-by-step : there can be a lot of reason for that first, i want to tell you I haven't IGP on my motherboard : it's a nforce2-400ultra (maybe the igp can give problems, i don't know) I use acpi, but I disable apic and I use test2-mm1 (maybe the mm1 patch is the reason why it works for me) to install the nvnet driver, i get the nforce2 tarball on nvidia web site I decompress then go to the nvnet source tree (nforce/nvnet) I patch it : patch -p1 < /the/path/to/nvnet.2.5-1.diff then install it with "make && make install" that's all try with the last version off nvnet, you shouldn't have any problem (I hope) ps : my network is statically configured about the cpu utilization, I notice nothing strange to get the mm1 patch, it's here : http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test2/ good luck ------------------------------------------------------------- NetCourrier, votre bureau virtuel sur Internet : Mail, Agenda, Clubs, Toolbar... Web/Wap : www.netcourrier.com Téléphone/Fax : 08 92 69 00 21 (0,34 € TTC/min) Minitel: 3615 NETCOURRIER (0,15 € TTC/min) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
