I've had this problem for a while. When booting Debian Lenny, and perhaps Etch as well. When booting up I've had the following output trying to access 224.0.0.251.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver eth0: no IPv6 routers present DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=257 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=237 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=257 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=237 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=257 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=237 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=239 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=219 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=136 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=116 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=136 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=116 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=136 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=116 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=195 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=175 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=200 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=180 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=91 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=71 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 DROPPED IN= OUT=eth0 SRC=192.168.0.8 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2 According to RFC 3171 this block of addresses (224.0.0.x) is reserved for special purposes. 192.168.0.8 is the static address of my Lenny install, and 224.0.0.251 is the mystery address. There are 2 daemons that are running and looking for a response at bootup. Ntpd is directed towards my other machine that is getting it's time from the Internet. That is across the LAN, not the Internet. That's not the problem. The only thing accessing the Internet at boot up is freshclam, and that once the ethernet connection is up. Any help, suggestions would be really welcome. Nigel. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
