Hello, I'm wondering whether something is wrong with my hardware. I'm attaching an dmesg output I stored.
For a few days sound output has disappeared. That
started as I enabled tmpfs support in the kernel,
which also enabled the user-mode udev program to run.
However, booting in the old kernel, in which udev
won't get started, didn't solve anything - sound not
coming back.
I'm suspecting problems with the harddisc, especially
as I see modules not getting loaded correctly on boot
time, and them loading correctly on second try; I've
also seen udev "hanging" on boot time, while, at a
certain interval, printing "lost hdb interrupt" or
something like that (leaving me no choice but to
reboot the machine - using the physical reboot
button). Again, next try, it'd boot fine;
I'm worried about these lines:
hdb: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
ide: failed opcode was: 0xef
hdb: drive not ready for command
hdb: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
ide: failed opcode was: unknown
hdb: drive not ready for command
hdb: set_drive_speed_status: status=0x58 { DriveReady
SeekComplete DataRequest }
ide: failed opcode was: unknown
hdb: CHECK for good STATUS
Those aren't showing up consistently in dmesg output
either.
I hope I'm wrong, that this somehow is some
configuration error or so (in udev configuration
perhaps??) but...
Hoping someone could tell me what's a cause for this.
regards,
Joris Huizer
____________________________________________________________________________________
Be a better Heartthrob. Get better relationship answers from someone who knows.
Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545433
dmesg.out
Description: 1529026689-dmesg.out
