Moving to a new disk on Debian system with root Filesystem on LVM over
encryption mini-HOWTO
Babstar
August 2007,
Thanks to the Debian team for all your hard work & great software.
Current setup
I used the standard Etch installer to setup and encrypted disk for my
laptop. However, I now want to move to a bigger hard disk, without
having to reinstall the system. In this mini howto I will show you how
I did it. I will try and make it as generic as possible. However,
following this recipe exactly will not work unless you have a similar
set up. You will need to examine your own system and make modifications
as applicable.
This technique could even be used to change the passphrase of an
encrypted disk as it makes a straight copy. It could also create a
bootable system on a USB external drive (provided your system can boot
off external media), although there are other HOWTO's floating around
that will probably be more helpful.
The basis of my method is to copy data to & modify the new disk only,
leaving the original installed system on the old disk pristine. This is
conservative, giving us both backup & reversion capability.
Having the root filesystem on LVM over encryption complicates the the
move as it requires an initramfs image to boot. However one of the
limitations of LVM is it prevents us using the same volume-group name
twice (which is logical). Unfortunately the update-initramfs script hard
codes the LVM root filesystem volume group into the initramfs image, but
we will need to change LVM volume groups for the new system in the
intramfs image for it to be bootable. We will have to manually unpack,
modify the hard coded root LVM volume group & repack our initramfs image
so we can boot the new disk.
I developed this method using a virtualbox debian virtual machine,
installing a system that replicated my laptop's. This allowed me to
practice everything without leaving my real system unbootable. I would
highly recommend a run through on a virtual machine as practice, as this
is a complex procedure. Any mistakes along the way can be fatal to your
system.
I would also recommend reading the Hard disk upgrade mini HOWTO. If you
don't understand the LVM commands take a close look at the LVM HOWTO.
This HOWTO is debian centric, however it should provide enough hints for
other ditro's. I am just a user, documenting the steps I took to move my
data. I'm sure there are easier methods & any suggestions or
improvements would be welcomed. If it is useful to people, perhaps it
could be included in the debian documentation. Please feel free to
copy, modify & use it as you see fit.
Disclaimer: Use of the following information may destroy your data, hard
drive, cause spontaneous combustion of your computer & possibly
impregnate your dog. Use at your own risk, I take absolutely no
responsibility for any loss or damage.
Having said all that, it worked for me :)
In brief, the step to moving the data to a new disk are:
1) Working out your disk layout
2) preparing a new disk
3) Copy your data
4) Rebuild initramfs image
5) Modify fstab, initramfs-tools & crypttab config
6) Install grub on your new disk MBR
7) Swap disks
8) Post move clean-up
9) Enjoy the new roominess!
1) Disk Layout
The Etch installer put the original system on two partitions, the first
being a small unencrypted boot partition (hda1), while everything else
is on a larger LVM over encrypted partition (hda5).
Working out exactly how your encrypted setup is configured is the one of
the hardest parts of the procedure. dmsetup can help us here:
# dmsetup status
vg01-home: 0 25165824 linear
vg01-tmp: 0 1638400 linear
vg01-swap: 0 3072000 linear
vg01-usr: 0 13631488 linear
vg01-root: 0 1024000 linear
vg01-var: 0 4194304 linear
hda5_crypt: 0 58209881 crypt
Together with fstab (or mount) we can work out how things fit together.
Here is an extract from my /etc/fstab
/dev/mapper/vg01-root / ext3 defaults,errors=remount-ro
0 1
/dev/hda1 /boot ext3 defaults 0 2
/dev/mapper/vg01-home /home ext3 defaults 0 2
/dev/mapper/vg01-tmp /tmp ext3 defaults 0 2
/dev/mapper/vg01-usr /usr ext3 defaults 0 2
/dev/mapper/vg01-var /var ext3 defaults 0 2
/dev/mapper/vg01-swap none swap sw 0 0
So, in my case, things are arranged as
/ logical volume vg01-root over encrypted disk hda5_crypt
/boot hda1
/home logical volume vg01-home over encrypted disk hda5_crypt
/tmp logical volume vg01-tmp over encrypted disk hda5_crypt
/usr logical volume vg01-usr over encrypted disk hda5_crypt
/var logical volume vg01-var over encrypted disk hda5_crypt
swap logical volume vg01-swap over encrypted disk hda5_crypt
This is how I visualize my disk being arranged:
--------------------------------------------------------
| / |/home | /usr | /var |/tmp | swap |
<--- Filesystem Layer
|------------------------------------------------------|
| vg01 LVM layer |
--------|------------------------------------------------------|
| /boot | hda5_crypt LUKS encrypted layer |
--------|------------------------------------------------------|
| hda1 | hda5 Physical disk |
----------------------------------------------------------------
As I said, this is one of the hardest parts, working out how things are
arranged. Stop here until you understand how your disk is arranged.
You cannot complete the move until you know your layout.
From here on in, I will be using reference to *MY* old volume group
vg01 & *MY* new volume group vg02. You will need to change this as
appropriate for your old & new targets.
2) Preparing the new disk.
We are going to rebuild the new disk in layers, starting at the bottom,
with the encryption, then the LVM & finally the filesystem.
I have an IBM T41, which allows me to install a second hard drive via
the ultrabay, and it is seen as hdc. If you don't have access to an
ultrabay, or cannot install a second drive, you could use an external
USB drive case. You will need to change the target disk to suit your setup.
From here it is critical that you get your target devices correct,
otherwise you will destroy your existing data. Type carefully, stop,
think and execute.
I will be keeping the exact layout on the new disk. The new disk is
partitioned with cfdisk
# cfdisk /dev/hdc
adding a small partition (250M) hdc1 for the boot, and the rest of the
disk as hdc5 for the encrypted partition.
Optionally, many suggest over-writing the disk with random data. Goggle
is your friend here.
We will now encrypt the larger partition.
# cryptsetup luksFormat /dev/hdc5
you will be prompted for a luks passphrase, twice. This is your chance
to change your passphrase!
Now we can open the disk.
# cryptsetup luksOpen /dev/hdc5 hdc5_crypt
you will be prompted for your luks passphrase, enter it.
Now we prepare the LVM side of things, this is straight out of the LVM
howto.
Make a LVM physical volume over the encrypted disk
# pvcreate /dev/mapper/hdc5_crypt
Create a new volume group. Gotcha, this *CANNOT* be the same as an
existing volume group, this leads to complications later with the
initramfs image. We will call the new volume group vg02.
# vgcreate vg02 /dev/mapper/hdc5_crypt
Activate the volume group
# vgchange -a y vg02
Now we can create the logical volumes for our data, feel free to choose
you size as appropriate:
root 700Mb, home 20Gb, usr 7Gb, tmp 2Gb & swap 1.5Gb
# lvcreate -L700 -nroot vg02
# lvcreate -l20G -nhome vg02
# lvcreate -L7G -nusr vg02
# lvcreate -L2G -ntmp vg02
# lvcreate -L2G -nvar vg02
# lvcreate -L1.5G -nswap vg02
Make our filesystems, checking for bad blocks:
# mkfs.ext3 -c /dev/hdc1
# mkfs.ext3 -c /dev/vg02/root
# mkfs.ext3 -c /dev/vg02/home
# mkfs.ext3 -c /dev/vg02/usr
# mkfs.ext3 -c /dev/vg02/tmp
# mkfs.ext3 -c /dev/vg02/var
Finally make the swap
# mkswap /dev/vg02/swap
Now we can use the hard disk upgrade mini-howto
http://www.faqs.org/docs/Linux-mini/Hard-Disk-Upgrade.html
Mount the partitions
# mkdir /new-disk
# mount /dev/vg02/root /new-disk
# mkdir /new-disk/home
# mount /dev/vg02/home /new-disk/home
# mkdir /new-disk/usr
# mount /dev/vg02/usr /new-disk/usr
# mkdir /new-disk/tmp
# mount /dev/vg02/tmp /new-disk/tmp
# mkdir /new-disk/var
# mount /dev/vg02/var /new-disk/var
# mkdir /new-disk/boot
# mount /dev/hdc1 /new-disk/boot
let all users access tmp
# chmod 1777 /new-disk/tmp
3) Copy your Data
Unmount any network or external drives that you don't want to copy data
from.
Drop into single user mode so the filesystem won't change.
# telinit 1
Copy the files (again straight from the upgrade howto) This will take
quite some time.
*NOTE* that's the numeral one, not the letter l for -1Ab
# cd / && echo cp -a `/bin/ls -1Ab | egrep -v "^new-disk$|^proc$"`
/new-disk | sh
Make the /proc directory:
# mkdir /new-disk/proc
4) Rebuild initramfs image
Because update-initramfs script only looks at the current running LVM
volume group for the root filesystem, we need to manually update it to
use our new volume group.
Make somewhere safe to manipulate the initramfs image.
# mkdir /new-disk/tmp/initramfs
# cd /new-disk/tmp/initramfs
Find current running kernel
# uname -a
Linux laptop 2.6.21-1-686 #1 SMP Sat May 26 16:14:59 UTC 2007 i686
GNU/Linux <---- yours may be different
Copy the current running kernel initramfs image
# cp /new-disk/boot/initrd.img-2.6.21-1-686 /new-disk/tmp/initramfs/
<-- use your running kernel from previous step
Unpack the initramfs image:
# zcat /new/disk/tmp/initramfs/initrd.img-2.6.21-1-686 | cpio -i
Remove the original iniramfs image from the current directory:
# rm /new-disk/tmp/initramfs/initrd.img-2.6.21-1-686
Find any instances of vg02 in the extracted files:
# grep -r vg01 /new-disk/tmp/initramfs/*
Change all references to vg01 to vg02. I had to modify the following files:
/new-disk/tmp/initramfs/conf/conf.d/resume
/new-disk/tmp/initramfs/conf/conf.d/cryptroot
/new-disk/tmp/initramfs/etc/uswsusp.conf
I also removed any backup files left by my editor.
Now we need to repack the initramfs image:
# find . | cpio --quiet -o -H newc | gzip -9 >
/new-disk/tmp/initramfs/initrd.img-2.6.21-1-686
Move old image out of the way:
# mv /new-disk/boot/initrd.img-2.6.21-1-686
/new-disk/boot/initrd.img-2.6.21-1-686.OLD
copy the modified image back to the boot directory:
# cp /new-disk/tmp/initramfs/initrd.img-2.6.21-1-686 /new-disk/boot/
5) Modify fstab, initramfs-tools & crypttab config.
Fstab
Now we need to modify fstab, once again changing any reference of vg01
to vg02 in /new-disk/etc/fstab
Initramfs-tools scripts
Find all references to vg01 & change to vg02 for initramfs-tools configs
# grep -r vg01 /new-disk/etc/initramfs-tools/*
Edit all the files that contain reference to vg01 and change to vg02.
For me this is:
/new-disk/etc/conf/conf.d/resume
/new-disk/etc/conf/conf.d/cryptroot
(I also removed the temporary files created by the editor joe ending with ~)
Crypttab
Crypttab only needs to be modified if you have changed the layout of
your disk. In my case I *DID NOT* change anything, because hdc will
become hda when swapped, and I kept the the encrypted partition as the
first logical partition on that disk. For completeness, my crypttab:
# cat /new-disk/etc/crypttab
hda5_crypt /dev/hda5 none luks
6) Install grub on your new disk MBR
Change all references to vg01 to vg02 in the
/new-disk/boot/grub/menu.1st file.
Make sure you modify the following line, even though it is commented
out, grub-update uses this & *MUST* be updated to your new volume group.
# kopt=root=/dev/mapper/vg01-root ro
Install grub on to the MBR of the new disk (make sure you get your disk
correct, or your current system may become unbootable)
# grub-install --root-directory=/new/disk --recheck /dev/hdc
(this takes a long time, about 10 minutes on my machine)
Final check
Optional check for any missed references to the original volume group
vg01 on the new drive
# grep -r vg01 /new-disk/boot/*
# grep -r vg01 /new-disk/etc/*
The only files should be contain reference to vg01 are
/etc/lvm/cache/.cache & /etc/lvm/.cache, these don't need to be changed
(you may however also find backup files from you editor, Joe leaves
behind files ending in ~).
7) Swap disks
Shutdown, physically swap disks. Boot into the kernel of the modified
the initramfs image (2.6.21-1-686 for me). Hopefully you should see
grub run the initrd image runs & be prompted for you luks password and a
normal boot. If things don't work, you can swap disk back again,
carefully re-read these instructions & try to work out what went wrong.
8) Post move cleanup
Remove the old image file we moved aside
# rm /boot/initrd.img-2.6.21-1-686.OLD
Now we need to do is rebuild all the initramfs images for all installed
kernels. Have a look in your /boot directory
# ls | grep initrd
initrd.img-2.6.18
initrd.img-2.6.18-4-686
initrd.img-2.6.18-4-686.bak
initrd.img-2.6.18.bak
initrd.img-2.6.21
initrd.img-2.6.21-1-686
initrd.img-2.6.21-1-686.bak
initrd.img-2.6.21.bak
We can get each kernel package to rebuild its initrd image file with:
# dpkg-reconfigure linux-image-2.6.21-1-686
Repeat the process with all of your installed kernels. It will also
re-run grub each time.
Finally, being a laptop I had to update uswsusp package config:
Change vg01 references to vg02 in /etc/uswsusp.conf & reconfigure the
package.
# dpkg--reconfigure uswsusp
9)Enjoy!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
