ann kok([EMAIL PROTECTED]) is reported to have said:
> Hi all
>
> I have question about network card in etch
>
> 1/ I have 2 optical fibre cards.
> one is Intel 2 ports and one is Dlink 1 port
>
> "dmesg | grep eth" can show
> e1000: eth0 intel pro/1000 network connection
> e1000: eth1 intel pro/1000 network connection
> eth2: D-link DGE-550SX
>
> but when I type ifconfig?
> it only shows eth7 and eth8 for Intel card
> and the eth1 becomes Dlink card
>
> I don't configure the /etc/network/interface
<--<snip>-->
I would suggest that you install the debian-reference package. In
chapter 10 you will find answers to all/most of the questions you
have. If, after reading the information in the reference, you need
more help we will be better able to help you.
Wayne
--
Using TSO is like kicking a dead whale down the beach.
-- S. C. Johnson
_______________________________________________________
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
