Yuwen Dai([EMAIL PROTECTED]) is reported to have said: > On 6/19/07, Wayne Topa <[EMAIL PROTECTED]> wrote: > > > >Yuwen Dai([EMAIL PROTECTED]) is reported to have said: > >> Dear all, > >> > >> I have a Intel pro100 network card in my PC. The system loads kernel > >module > >> `e100' automatically when booting. But ifconfig eth0 up failed. If I > >> manually load `eepro100', ifconfig also failed. This is some output: > >> <--<snip>-->
> >If you try 'ifup eth1' or 2,3,4 and it comes up then > > > Hi Wayne, > > Yes. `ifconfig eth1' brings up the network. > > > Take a look at > >/etc/udev/rules.d/z25_persistent-net.rules: > > > >I had this occur on a laptop. My net_rules file had a bunch of > >eth lines and my eth1 cane up when I did 'ifup eth6". Removed all of > >the eth rules except eth0 and all was well again. > > > There's another rule with a different MAC address in this file. This > reminds me that I once used another 3com NIC in the PC. So udev remembers > this. > > Thank you very much! Glad to help. Another satisfied Debian User. :-) WT -- It works! Now if only I could remember what I did... _______________________________________________________ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
