> what happens if you do a ifconfig eth0 up ?
I get the "No such device" error
> what are the contents of /etc/network/interfaces?
$ cat /etc/network/interfaces
auto lo eth0
iface lo inet loopback
iface eth0 inet static
address 192.168.0.33
netmask 255.255.255.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1
> whats the output of lspci?
$ lspci
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev
03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Intel Corporation 82740 (i740) AGP
Graphics Accelerator (rev 21)
> you might also want to try to add 8139cp to /etc/modprobe.d/blacklist and
> adding some of these boot options to /boot/grub/menu.lst:
> irqpoll
> pci=biosirq
> pci=irqmasq
I tried all of these together - still no luck. It still loads 8139cp
despite it being in the blacklist file. I have tried removing and reloading
8139too and 8139cp, then restarting the network - still no luck.
Will try new kernel from backports next.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
