It happens only with AMD64 port, before I was using x86 port and all work great, I have an EMT64 capable processor and runs debian great, all services work fine except xserver-xorg with driver i810, let me say that the error is just when unloading X, before that I can reach my desktop, use the Render, 3D accel, Composite Extension, Compiz etc but when Shuts down the Computer I get a Kernel Panic, I think to set the driver to VESA and work but haven´t DRI, 3D Accel, Composite etc.
My Hardware is: - Celeron D 3.6 GHz EMT64 - ASRock 775i65G - Intel(r) 865G Chipset - Integrated Intel(r) Extreme Graphics 2 (intel 82865G Graphics) The error screen message wite some like: ********************CODE********************** [<ffffffff8004cf10>] thread_return+0x0/0xe7 [<ffffffff8004cf10>] vsf_write+0xe1/0x174 [<ffffffff8004cf10>] sys_write+0x45/0x6e [<ffffffff8004cf10>] system_call+0x7e/0x83 Code: 4c 8b 20 48 89 c7 c4 89 63 40 ff 50 08 48 89 e8 89 ea 48 ff RIP [ffffffff8028e424] __rcu_process_callbacks+0x115/0x1a8 RSP <ffffffff8004cf10> CR2: ffffffff80a324c0 <0> Kernel Panic - not syncing: Aiee, killing interrupt handler! ********************END OF CODE********************** I have put the one screenshoot here http://bp0.blogger.com/_w833IbeIZhI/RjpWdCwgHwI/AAAAAAAAAA4/h4-Lba1UnCU/s1600-h/i810+crash.jpg My xorg.conf is: # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" EndSection Section "Device" Identifier "Intel Corporation 82945G/GZ Integrated Graphics Controller" Driver "vesa" #"i810" # I have to comment i810 to avoid crash... BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "DELL E176FP" Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Corporation 82945G/GZ Integrated Graphics Controller" Monitor "DELL E176FP" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" Option "RENDER" "Enable" EndSection Please say me what can do to set the correct driver Thanks for your Help
