Hello Lars, Lars de Bruin wrote: > When i connect my Maxtor OneTouch 500GB III EXT3 , dmesg says there is a > new device connected: > Apr 21 21:31:12 localhost kernel: usb 5-5: new high speed USB device > using address 2 > What happens then is a mistry for me: > 1. When i run top: id = 100% load > 2. System load goes up exactly to 2.0 2.0 2.0 > 3. No dev is given to the external harddisk > 4. I have to reboot to see the external harddisk > 5. cat /proc/usb/devices my terminal hangs > 6. lsusb my terminal hangs
According to your subject line: all this == nothing What does fdisk -l tell you? Could it be that there are some hardware problems with usb on your sarge system? I had some 'funny' problems with usb hard drives on one of my (older) computers and it turned out that those disappeared, when I connected the usb disk to another computer (different hardware, but same installation/configuration). Otherwise it could also be a configuration issue. I have used many different usb disks on many different sarge systems without problems. HTH, regards, Johannes > This is not the way it should be. > The disk is 100% ok and tested on a Ubuntu Laptop, and i have run fschk. > > Server: > Debian Sarge (updated) > kernel-image-2 2.6.8-16 > 2x 160GB (Software Mirror) md0 > 2x 200GB (Software Mirror) md1 > 2GB Memory -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
