On Sat, Apr 14, 2007 at 11:36:03AM -0400, Ralph Katz wrote: > On 04/13/2007 03:50 AM, Raffaele Morelli wrote: > > > > > > 2007/4/12, Ralph Katz <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>: > > > > I have the same issue for an isapnp soundcard on etch. alsaconf sets it > > up, writes to /etc/modprobe.d/sound, but even after alsactl store, > > reboot requires re-doing the steps. > > > > Anyone else? Ideas? > > > > Thanks, > > Ralph > > > > > > Did you look at alsa-project web sites? Search specific tips for your > > card there, isapnp sound card require isapnp tools/packages to deal > > with. Have a look. > > > > cheers > > raffaele > > I only see outdated stuff there, but thanks. Besides, the sound card > works fine, alsa works fine, I just have to repeat the alsaconf steps > EACH reboot. Update-modules after doing this didn't help either. > Nothing gets loaded at boot: > > ~$ grep -i alsa /var/log/boot > Sat Apr 14 11:15:50 2007: ^[[9;30]^[[14;30]Setting up ALSA...done (none > loaded). > > Very, very frustrating. And when this is done, then I get to tackle > making esd (esound) work with alsa for mixing. > > You can tell I'm really ready to get past this etch upgrade. > > Regards, > Ralph > > --1e1c94ce6334cecf9b45d8dce1e521fb
I had a similar problem when I upgraded to etch. I'm not sure if this was mentioned yet, but what I had to do was: 1. Run alsaconf 2. Run alsactl store 3. Add my soundcard kernel module in /etc/modules, so that the module would be loaded at boot. In my case I added the module snd_cs4236. I know that's frustrating - took me a few weeks before I had it figured out. Best of luck. Regards, Barry Smith -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
