On Fri, Mar 30, 2007 at 07:39:05PM +0200, Listas Locatel wrote: > Hi, I am configuring a bonding in linux (Debian) and I have many > problems. Always Only one card it's receiving and sending packets. > > My config is: > > iface bond0 inet static > address 192.168.18.210 > netmask 255.255.255.0 > network 192.168.18.0 > broadcast 192.168.18.255 > gateway 192.168.18.254 > up ifenslave bond0 eth0 eth1 > down ifenslave -d bond0 eth0 eth1 >
Here is my configuration : http://smhteam.info/wiki/index.linux.php5?wiki=ChannelBonding The link is in french but you should be able to find what you need and compare your configuration to mine. If you want more informations, let me know. > Other problem is when I "ifdown" then bonding device the OS goes to a > infinite loop and I have to shutdown uncleanly, it's strange.... > I load the module with mode=0 and mode=4 options, with miimon=100 and > without miimon option... I don't know. I haven't a 803.2ad switch > capable and the mode=4 fails and it's OK. > > The ethernet cards I'm using are a Realtek 8169 (From DLINK and KTI) .. > I don't know what can be the problem ... > > You know ?? Yes. I had the same problem using Realtek 8169, too. But as a matter fact, I get out of this mess by using two other cards. So, you are not alone 8)! -- Franck Joncourt http://www.debian.org http://smhteam.info/wiki/ GPG server : pgpkeys.mit.edu Fingerprint : C10E D1D0 EF70 0A2A CACF 9A3C C490 534E 75C0 89FE
signature.asc
Description: Digital signature
