On Wednesday 07 February 2007 19:00, Prismatic Plasma wrote:
> On Wednesday 07 February 2007 17:44, Andrew Sackville-West wrote:
> > On Wed, Feb 07, 2007 at 04:54:52PM -0500, Prismatic Plasma wrote:
> > > On Wednesday 07 February 2007 16:27, Douglas Allan Tutty wrote:
> > > > On Wed, Feb 07, 2007 at 04:22:18PM -0500, Prismatic Plasma wrote:
> > > > > On Wednesday 07 February 2007 15:28, Douglas Allan Tutty wrote:
> > > > > > On Wed, Feb 07, 2007 at 03:20:55PM -0500, Prismatic Plasma wrote:
> > > > > > > I started with a net installed etch rc1 for amd64. I have ASUS
> > > > > > > M2N-MX mobo with SATA harddrive and IDE dvd writer. Install
> > > > > > > went okay, but no sound. Made a custom 2.6.20 kernel. Now I
> > > > > > > have sound but no cdrom! The trouble shows up in udev, but I'm
> > > > > > > not sure if that's the root of the problem.
> > > > > >
> > > > > > Have you installed all the alsa- packages and run alsaconf? Do
> > > > > > you mean that you did this with the stock 2.6.18 kernel?
> > > > >
> > > > > Yes, first with the stock kernel, then repeated it when I installed
> > > > > the custom kernel.
> > > >
> > > > Have you opened a mixer and raised the volume and unmuted? Alsa
> > > > starts out with everything muted.
> > >
> > > alsaconf did that for me. I checked it anyway, though. The stock kernel
> > > didn't have the driver for the onboard audio. That's why I made a
> > > custom one. No problem with volume there. The problem with the custom
> > > kernel is that I can't mount a data cd. I can get an audio cd to mount,
> > > but only through a weird process.
> >
> > have you diff'ed your kernel config's looking for cd stuff that might
> > be different?
>
> Nothing stands out. I didn't find anything that seemed to relate to the cd.
> There are some differences I'm not sure about. In General Setup the stock
> kernel has:
> CONFIG_POSIX_MSQUEUE=y
> CONFIG_AUDIT=y
>
> I didn't set them for the custom kernel. Also, the stock kernel has the
> following from Kernel Hacking:
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_UNUSED_SYMBOLS=y
> CONFIG_DEBUG_KERNEL=y
> CONFIG_DETECT_SOFTLOCKUP=y
>
> I said no to these for the custom kernel. Could there be something in
> CONFIG_UNUSED_SYMBOLS that I need?
I created another kernel, adding the following to my previous custom kernel:
General Setup:
POSIX_MQUEUE
SYSFS_DPRECATED
Kernel Hacking:
UNUSED_SYMBOLS
Things still aren't right, but it's better. I can mount both data and audio
cds, but it's still awkward. The first time I put a disk in, nothing happens.
No links get created in /dev. However, with root I can
mount /dev/.static/dev/hda -t iso9660 /mnt/cdrom
Then everything's fine until I reboot. Autodetect works when I change cds.
So now the question is: Why don't the links get created when I put in a disk
for the first time? For some reason, I have to manually mount it (or run
cdplay) as root. I know why it has to be root -- because /dev/.static is
accessible only to root.
I have a feeling the rest of this fix is a one-liner. It's either in the
kernel configuration or some command I need to run. Is there a clever guru
out there with the magic answer?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
