Rrodak wrote: > I have the same problem > > I see the flash storage on usb : > > Bus 003 Device 017: ID 10d6:ff61 Actions Semiconductor Co., Ltd > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 004: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / > Trust 450L Optical Mouse > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 001: ID 0000:0000 > > > But no devices in /dev/sd.. > > I checked the kernel modules, all ok > > only think I see on dmesg is: > > usb 3-6: new high speed USB device using ehci_hcd and address 17 > usb 3-6: configuration #1 chosen from 1 choice > > no more messages... > somebody an idea?
Does lsusb show a usb_storage module when the device is plugged in? Here's what I see in dmesg when I plug in my pen drive: usb 5-6: new high speed USB device using ehci_hcd and address 3 usb 5-6: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. Vendor: USB 2.0 Model: Flash Disk Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 1981440 512-byte hdwr sectors (1014 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through SCSI device sda: 1981440 512-byte hdwr sectors (1014 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi removable disk sda usb-storage: device scan complete -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
