On Sun, 12 Nov 2006 12:50:14 +0100, Florian Kulzer wrote: >> For cupsys in Etch, is it possible to use gimpprint driver instead of >> gutenprint? > > The current cupsys-driver-gimpprint package in Etch is just an empty > transitional package to ensure an automatic upgrade to the gutenprint > system.
Thanks for reply. The feedback I get from cups.general is that the driver that I was using is actually not the gutenprint's but CUPS'. So I re-installed everything again, but still I can't see any gutenprint drivers when I get to the choosing "Model/Driver" step at web setup, all are CUPS', eg: "EPSON 9pin/24pin ..." "EPSON Stylus Color Series CUPS v1.2" "EPSON New Stylus Color Series CUPS v1.2" Why? What I'm missing? Here is what's in my system after re-installation: cupsys_1.2.5-1 cupsys-bsd_1.2.5-1 cupsys-client_1.2.5-1 cupsys-common_1.2.5-1 cupsys-driver-gutenprint_5.0.0-2 foomatic-db_20060822-1 foomatic-db-engine_3.0.2-20060712-1 foomatic-db-gutenprint_5.0.0-2 foomatic-filters_3.0.2-20060712-3 gs-esp_8.15.3.dfsg.1-1 libcupsys2_1.2.5-1 Here is how I did: aptitude --purge-unused purge foomatic-db-engine foomatic-db-gutenprint foomatic-filters cupsys cupsys-bsd cupsys-driver-gutenprint cupsys-driver-gimpprint foomatic-db-gimp-print aptitude install foomatic-db-engine foomatic-db-gutenprint foomatic-filters aptitude install cupsys cupsys-bsd cupsys-driver-gutenprint gutenprint-doc Here are epson gutenprint drivers in my system: ls /usr/share/cups/model/gutenprint/5.0/en/stp-epson-* /usr/share/cups/model/gutenprint/5.0/en/stp-epson-acl_c2000.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-acl_c2000ps.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-acl_c8500.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-acl_c8500ps.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-acl_c8600.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-acl_c8600ps.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-actl_1100.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-actl_ii.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-5200.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-5200plus.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-5700.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-5700ps.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-5800.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-5800ps.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-5900.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-5900ps.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-6100.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-6100ps.5.0.ppd.gz /usr/share/cups/model/gutenprint/5.0/en/stp-epson-epl-7100.5.0.ppd.gz How should I add the correct one? (My printer is Epson Stylus CX1500) thanks -- Tong (remove underscore(s) to reply) http://xpt.sourceforge.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
