Good day i have acer 5102wlmi and debi unstablle .
the network is default with no encryption.
the wifi led is working.
debian:/home/mha13# lspci |grep Broadcom
0000:06:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
debian:/home/mha13# lsmod |grep bcm
bcm43xx 429824 0
ieee80211softmac 34304 1 bcm43xx
ieee80211 36680 2 bcm43xx,ieee80211softmac
firmware_class 15616 2 bcm43xx,pcmcia
im using the extracted firmware from 80211g.zip to /lib/firmware
ebian:/home/mha13# ifconfig
eth1 Link encap:Ethernet HWaddr 00:16:CF:5D:61:C9
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:143 (143.0 b) TX bytes:888 (888.0 b)
Interrupt:50 Base address:0xc000
yesterday my dhclient looked like that :
debian:/home/mha13# dhclient eth1
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
sit0: unknown hardware address type 776
sit0: unknown hardware address type 776
Listening on LPF/eth1/00:16:cf:5d:61:c9
Sending on LPF/eth1/00:16:cf:5d:61:c9
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 20
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 18
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 1
No DHCPOFFERS received.
No working leases in persistent database.
Sleeping
today it look like that
debian:/home/mha13# dhclient eth1
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
ppp0: unknown hardware address type 512
sit0: unknown hardware address type 776
ppp0: unknown hardware address type 512
sit0: unknown hardware address type 776
Listening on LPF/eth1/00:16:cf:5d:61:c9
Sending on LPF/eth1/00:16:cf:5d:61:c9
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
receive_packet failed on eth1: Network is down
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 1
No DHCPOFFERS received.
No working leases in persistent database.
Sleeping.
now i cated dmesg and saw this :
bcm43xx: Radio turned off
bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
bcm43xx: Radio turned on
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1490:bcm43xx_find_lopair()
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1490:bcm43xx_find_lopair()
bcm43xx: Chip initialized
bcm43xx: DMA initialized
bcm43xx: 80211 cores initialized
bcm43xx: Keys cleared
eth1: no IPv6 routers present
SoftMAC: Authentication timed out with 00:11:6b:22:7f:76
bcm43xx: Radio turned off
bcm43xx: DMA 0x0200 (RX) max used slots: 0/64
bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
bcm43xx: Radio turned on
bcm43xx: Chip initialized
bcm43xx: DMA initialized
bcm43xx: 80211 cores initialized
bcm43xx: Keys cleared
ADDRCONF(NETDEV_UP): eth1: link is not ready
debian:/home/mha13# uname -r
2.6.18-1-amd64
debian:/home/mha13# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
ppp0 no wireless extensions.
eth1 IEEE 802.11b/g ESSID:off/any Nickname:"Broadcom 4318"
Mode:Managed Frequency=2.462 GHz Access Point: Invalid
Bit Rate=1 Mb/s Tx-Power=19 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
any way plz advice .. (i have to use windows couse my wifi is off .. :'-()
- how to start wi-fi card (radio off /bcm43xx) Jabka Atu
