On Tue, Oct 17, 2006 at 09:43:01PM +0200, Kay Smarczewski wrote:
> On Tue, Oct 17, 2006 at 08:17:07PM +0200, Florian Kulzer wrote:
> > On Tue, Oct 17, 2006 at 17:17:36 +0200, Kay Smarczewski wrote:
> > > On Mon, Oct 16, 2006 at 08:35:24PM +0200, Florian Kulzer wrote:
> > > > On Mon, Oct 16, 2006 at 18:28:41 +0200, Jabka Atu wrote:
> > > > > Howdy,...
> > > > > i own acer 5102wlmi and im unable to start the sound system :
> >
> > [...]
> >
> > > > > im using
> > > > > kernel Linux debian 2.6.8-12-amd64-k8-smp #1 SMP Mon Jul 17 00:17:20
> > > > > UTC
> > > > > 2006 x86_64 GNU/Linux
> > > > >
> > > > > when i start alsaconf i get no supported pci card.
> > > > > i have installed alsa-utils alsa-base and alsa-oss
> > > >
> > > > Your kernel version suggests that you run Sarge. The version of alsa in
> > > > Sarge might be too old to support your hardware. Please post the output
> > > > of "lspci | grep -i audio" to let us know which soundcard is used. (That
> > > > has higher chances of success than hoping that someone will know it
> > > > directly from the model number of the laptop.)
> >
> > [...]
> >
> > >
> > > I have the same laptop and the same problem.
> > > The only difference is that i have the kernel 2.6.19rc2.
> > >
> > > lspci | grep -i audio :
> > > 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
> > >
> > > I tried to compile alsa for myself because i think i have to use a newer
> > > alsa. so i downloaded the 1.0.13rc3 and did the following:
> >
> > I don't have this card myself, but my 2.6.18 kernel sources suggest that
> > it is supported:
> >
> > $ awk '/MODULE_SUPPORTED/,/MODULE_DESCRIPTION/'
> > /usr/src/linux-source-2.6.18/sound/pci/hda/hda_intel.c
> > MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
> > "{Intel, ICH6M},"
> > "{Intel, ICH7},"
> > "{Intel, ESB2},"
> > "{Intel, ICH8},"
> > "{ATI, SB450},"
> > "{ATI, SB600},"
> > "{ATI, RS600},"
> > "{VIA, VT8251},"
> > "{VIA, VT8237A},"
> > "{SiS, SIS966},"
> > "{ULI, M5461}}");
> > MODULE_DESCRIPTION("Intel HDA driver");
> >
> > AFAIK, alsa in the 2.6.18 kernel sources is the released version 1.0.13
> > already and hence should be newer than 1.0.13rc3 (the 3rd release
> > candidate for this version). Maybe it is better to try getting the sound
> > to work with the released 2.6.18 kernel than with a release candidate
> > for 2.6.19.
> >
> > What happens if you run "modprobe snd_hda_intel"? Do you get error
> > messages? If you use udev, are /dev/snd, /dev/sndstat or /dev/mixer
> > created?
> >
> i don't know why, i don't know how, but now the sound is working! :)
>
> i have just rebooted for the second time...
>
> but you're right, my original error was not invoking the intel-module in
> the kernel.
now i just have another problem: i use centericq. and if i get an
message it sounds a little bit misterious. like playing the sound,
cutting the last part and playing again...
the files are wav. if i use the "play"-command on shell (used by
centericq) the same happens.
playing with mocp not works any more:
mocp: interface_elements.c:3267: iface_set_mixer_value: Assertion `value
>= 0 && value <= 100' failed.
and if i do:
alsamixer
i get:
hda_codec: num_steps = 0 for NID = 0xd
alsamixer: function snd_mixer_load failed: Invalid argument
modprobe snd_hda_intel don't throws any errors.
the only thing i can here is a part of a title and that is replayed
every minute or so....
have you any ideas?
Kay
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
