Hi! On Wed Jun 25, 2003 at 11:46:00PM +0200, Hugo van der Merwe wrote: > gateway/firewall/webserver. I had to move it to a modem for a while, > however, it refuses to connect. The laptop, however, with pretty much > an identical setup, connects without a hitch. So at the moment I've > got the laptop set up as gateway so that I can send this.
What are the modem manufacturers? Do you connect with a US Robotics on the gateway and with the internal modem of the laptop? > The connection doesn't get any further than LCP ConfReq. Apart for [...] > Jun 25 22:04:59 baboon chat[31603]: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0^M^M [...] > Jun 25 22:05:34 baboon pppd[31601]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic > 0x6b4f31ac> <pcomp> <accomp>] I had a similar problem yesterday. I have a US Robotics Sportster Message Plus. All went well except those pesky hangups without any special reason. So I found a french (sic!) page and I only could read some thoughts on USR AT commands. So I added AT&F1 before the ATDT stuff and voilą it worked without a hassle. I don't know if you use a USR modem but I think your problem lies within some special AT commands to setup your modem properly. Maybe there are some helping codes in the Modem-HOWTO. So long Thomas -- .''`. Obviously we do not want to leave zombies around. - W. R. Stevens : :' : Thomas Krennwallner <djmaecki at ull dot at> `. `'` 1024D/67A1DA7B 9484 D99D 2E1E 4E02 5446 DAD9 FF58 4E59 67A1 DA7B `- http://bigfish.ull.at/~djmaecki/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
