Hi all, I am running woody on a machine with 2 identical SCSI drives. / got mounted on /dev/sda1, /usr, /var, /tmp and /home on mirrors /dev/md1-4, respectively. Unfortunately "some" boot-script insists on initializing the RAIDs starting at /dev/md0, although I never even created this RAID-device, neither in mdadm.conf nor in fstab. This has the consequence that md0 (actually md1, if I were asked) does not get mounted - which is a major PITB, because /usr usually IS needed! Of course, the intention behind all this was to put / on /dev/md0 later on, when I got the 're-attaching a degraded mirror and all' figured out.. this is not the question here!). Either this behavior is intended (mdadm-0.72 from woody does it, as does mdadm-1.2 from unstable, which is what I'm running now), or it is really a bug. Why does mdadm have to start counting at 0? That would mean, that the array-definitions in mdadm.conf are simply ignored?! So why bother at all? What would happen if I were to decide putting /usr on an nfs mount is a great idea, would all the /dev/md(x>1) have their minor changed on next reboot, just because /dev/md1 got deleted? What a mess! I had hoped that the use of UUIDs for the RAIDs would effectively prevent such problems.
So, this is what my /etc/mdadm/mdadm.conf looks like: DEVICE /dev/sda5 /dev/sdb5 /dev/sda6 /dev/sdb6 /dev/sda7 /dev/sdb7 /dev/sda8 /dev/sdb8 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=ac3ebad4:22e38325:f056951a:575a466c devices=/dev/sda5,/dev/sdb5 ARRAY /dev/md2 level=raid1 num-devices=2 UUID=c7ceba6d:90b75c9a:2d374aa8:974ca746 devices=/dev/sda6,/dev/sdb6 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=0cdb65ec:23245a89:d2edb614:27c39e9c devices=/dev/sda7,/dev/sdb7 ARRAY /dev/md4 level=raid1 num-devices=2 UUID=9270f7be:137fc0bc:edf0c498:a53e09da devices=/dev/sda8,/dev/sdb8 and my /etc/fstab: /dev/sda1 / ext3 errors=remount-ro 0 1 /dev/sda2 none swap sw 0 0 /dev/sdb2 none swap sw 0 0 proc /proc proc defaults 0 0 /dev/md3 /tmp ext3 defaults 1 1 /dev/md1 /usr ext3 defaults 1 1 /dev/md2 /var ext3 defaults 1 1 /dev/md4 /home ext3 defaults 1 1 /dev/fd0 /floppy auto user,noauto 0 0 /dev/cdrom /cdrom iso9660 ro,user,noauto 0 0 Did I overlook anything? Any suggestions are welcome. Thanks -- regards, Jochen Rosenbauer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
