On Fri, 1 Sep 2006, James Brown wrote:
Justin Piszcz wrote:
On Fri, 1 Sep 2006, James Brown wrote:
All,
I have already posted this question to gmane.linux.raid, but would really
appreciate some help from a Debian perspective please...
My System has 2x120GB IDE disks with the an up-to-date Sarge install,
running kernel 2.6.8-3 and configured for mirroring.
When I tested booting my system, I found:
a) A kernel panic unless both disks are plugged in.
b) One disk removes from the array each reboot.
The relevant logs are on this thread:
http://article.gmane.org/gmane.linux.raid/13033/match=newbie+kernel+panic+raid1
I was advised this was a problem with my initrd because it didn't contain
a mdadm.conf file and presumably that I should make a new one.
Unfortunately, some friends of mine do not agree that my initrd is the
problem because they point out that I can still boot when two disks are
present. What do people here think?
Thanks in advance
James.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a
subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
1) You do not need an initrd at all.
I'm actually a newbie and using GRUB as it was installed by default.
Will deleting the /boot/initrd.img-2.6.8-3-386 file and initrd instruction
within menu.lst be sufficient?
No, you need to compile your own kernel with support for your hardware
that you use.
2) I would make sure you are booting from the /dev/md* partition.
I *think* I am booting from the /dev/md0 partition:
# cat /boot/grub/menu.lst
[...]
# groot=(hd0,5)
[...]
title Debian GNU/Linux, kernel 2.6.8-3-386
root (hd0,5)
kernel /boot/vmlinuz-2.6.8-3-386 root=/dev/md0 ro
initrd /boot/initrd.img-2.6.8-3-386
savedefault
boot
[...]
That appears to be right, but I would ditch the initrd stuff and use a
statically compiled kernel that you create for your hardware. Also, I use
LILO here.
I understand this means the system will load the BootLoader from the first
disk BIOS presents, and partition number 6 on that disk (in my case, hda6 or
hdc6). It will then try to boot the kernel from /dev/md0, which it should
manage:
# cat /etc/fstab
proc /proc proc defaults 0 0
/dev/md0 / ext3 defaults,errors=remount-ro 0 1
/dev/md1 /var/mail ext3 defaults 0 2
/dev/hda5 none swap sw 0 0
/dev/hdc5 none swap sw 0 0
/dev/hdd /media/cdrom0 iso9660 ro,user,noauto 0 0
I don't see a problem here, but please correct me if I've said somthing
wrong.
A classic mistake. NEVER use swap on different drives. You always want
to RAID1 the swap as well. If one disk dies and you are swapping to it,
the integrity of the data can be at risk. Always keep your swap on RAID.
>> 3) You must have a /boot on a
/dev/md partition. >
From looking at the above, /boot would fall under /dev/md0 (I think)?
It /looks/ right.
4) You need LILO installed with the special raid option in the config.
Maybe I should ditch GRUB and learn/install LILO.
Definitely.
If you are ever on IRC sometime, I may be able to better help you with
your issues.
The next step you need to really do is compile your own kernel and get it
working with RAID support and stop using an initrd/kernel.
Justin.
5) I have done this and tested by pulling each HDD out and it working
successfully with Debian + 2x74GB raptors.
Justin.
Thanks very much for your time.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject
of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
