On Mon, 23 Jun 2003, Lukas Ruf wrote:
> Mark C <[EMAIL PROTECTED]> [2003-06-23 13:23]:
> > > I just recently added a new hard drive to my firewall machine and I'm
> > > seeing the following errors:
>
assuming your fw was runnig fine .. until you added your new drive
a) make sure you have the same disk speed drive on the same ide cable
- do NOT mix-n-match ata33 w/ ata66 w/ ata100 w/ ata133
- do NOT mix-n-match 2MB disk buffer w/ 8MB disk buffers
b) do NOT use the silly 40 conductor ( ata-33 ) cables
- use the thin 80conductor cable ( ata66/100/133 )
take out sharp bends out of your cables
as has been suggested earlier, make sure you have enabled the
ide/ata chipset on your motherboard for the kernel you're using
c ya
alvin
> > > hda: set_multmode: status=0x51 { DriveReady SeekComplete Error } hda:
> > > set_multmode: error=0x04 { DriveStatusError }
> >
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
