On Tue, Aug 15, 2006 at 09:31:41 -0400, Celejar wrote:
> Hi,
>
> On Mon, 14 Aug 2006 20:51:14 -0500 Russell L. Harris wrote:
>
> > Celejar writes:
> > > I'm stymied about my inability to properly (re) configure my Xorg
> > > X server; I've googled and found people with similar problems, but
> > > no systematic solution or explanation. I figure I'll ask here
> > > before filing a bug report.
> >
> > # dpkg-reconfigure xserver-xorg
>
> Thanks for the reply. My OP wasn't clear; I HAD tried
> 'dpkg-reconfigure xserver-xorg' about a dozen times (purging and
> reinstalling, as the OP mentioned, was simply a more drastic step).
> The problem, as I mentioned, is that the config scripts don't *ask*
> any questions about monitor resolution or mouse device.
Make sure you have the following packages installed: discover (or
discover1), mdetect, xresprobe, read-edid. Add laptop-detect to that
list if you are dealing with a laptop. Then run "dpkg-reconfigure
xserver-xorg" again.
You can also try the mouse detection yourself; it should tell you the
correct device and protocol:
# mdetect -x
/dev/psaux
ImPS/2
To verify this you can run
# cat /dev/psaux | hd
You should see output scrolling by as soon as you move the mouse.
(Press CTRL-C to stop this and return to the command prompt.)
--
Regards,
Florian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
