Hello I have problems with ndiswrapper 1.18 in Etch. Compilation and installation is fine with "module-assistant a-i ndiswrapper-source", but then no way to make it work.
localhost:/home/me# ndiswrapper -l Installed drivers: 2802w driver installed, hardware present localhost:/home/me# modprobe ndiswrapper localhost:/home/me# dmesg|grep ndis ndiswrapper version 1.18 loaded (preempt=no,smp=no) ndiswrapper: driver 2802w (SMC,04/29/2004, 3.0.11.1) loaded ndiswrapper: using irq 10 ndiswrapper (miniport_init:262): couldn't initialize device: C0010006 ndiswrapper (pnp_start_device:438): Windows driver couldn't initialize the device (C0000001) ndiswrapper (miniport_halt:303): device cf8b7260 is not initialized - not halting ndiswrapper: device eth%d removed ndiswrapper: probe of 0000:03:00.0 failed with error -22 localhost:/home/me# I have to compile a ndiswrapper module for the new 2.6.16 Debian kernel. I had the same problem with the old 2.6.15 Debian kernel when I tried to upgrade ndiswrapper-source from 1.16 to 1.18, so I had to stay with 1.16. What can I do to solve this problem ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
