The card (lspci -v):
----------------------
0000:05:02.0 Multimedia controller: Philips Semiconductors SAA7133 Video
Broadcast Decoder (rev d0)
Subsystem: Unknown device 4e42:3306
Flags: bus master, medium devsel, latency 64, IRQ 50
Memory at fb7fe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <available only to root>
----------------------
Is one strange brand: Zaapa.net (for test, if doesn't works I can return it)
that seems one FlyDVB-T Hybrid (http://www.bttv-gallery.de/)
Seems that the best detection is with the model 84 because creates all
devices: video and radio. The model 55 doesn't see radio device.
But the sound doesn't works. The error message in syslog is «dsp access
error»
Any orientation? Thanks :)
-----------------------------------------------
# modprobe saa7134 card=84 audio_debug=1
syslog:
May 10 21:33:55 itaca kernel: saa7130/34: v4l2 driver version 0.2.14 loaded
May 10 21:33:55 itaca kernel: ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18
(level, low) -> IRQ 50
May 10 21:33:55 itaca kernel: saa7133[0]: found at 0000:05:02.0, rev: 208,
irq: 50, latency: 64, mmio: 0xfb7fe800
May 10 21:33:55 itaca kernel: saa7133[0]: subsystem: 4e42:3306, board:
LifeView FlyDVB Trio [card=84,insmod option]
May 10 21:33:55 itaca kernel: saa7133[0]: board init: gpio is 10000
May 10 21:33:55 itaca kernel: tuner 1-004b: chip found @ 0x96 (saa7133[0])
May 10 21:33:55 itaca kernel: tuner 1-004b: setting tuner address to 61
May 10 21:33:55 itaca kernel: tuner 1-004b: tuner: type set to tda8290+75a
May 10 21:33:56 itaca kernel: saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c
00 43 43 a9 1c 55 d2 b2 92
May 10 21:33:56 itaca kernel: saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff
ff ff ff ff ff ff ff ff ff
May 10 21:33:56 itaca kernel: saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01
03 08 ff 01 ed ff ff ff ff
May 10 21:33:56 itaca kernel: saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff
May 10 21:33:56 itaca kernel: saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05
01 01 16 32 15 ff ff ff ff
May 10 21:33:56 itaca kernel: saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff
May 10 21:33:56 itaca kernel: saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff
May 10 21:33:56 itaca kernel: saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff
May 10 21:33:57 itaca kernel: saa7133[0]: dsp access error
May 10 21:33:57 itaca last message repeated 5 times
May 10 21:33:57 itaca kernel: saa7133[0]/audio: tvaudio thread scan start [1]
May 10 21:33:57 itaca kernel: saa7133[0]/audio: PAL scan
May 10 21:33:57 itaca kernel: saa7133[0]/audio: scanning: B/G D/K I
May 10 21:33:57 itaca kernel: saa7133[0]: dsp access error
May 10 21:33:57 itaca last message repeated 3 times
May 10 21:33:57 itaca kernel: saa7133[0]: registered device video0 [v4l2]
May 10 21:33:57 itaca kernel: saa7133[0]: registered device vbi0
May 10 21:33:57 itaca kernel: saa7133[0]: registered device radio0
May 10 21:33:57 itaca kernel: saa7133[0]: dsp access error
May 10 21:33:57 itaca kernel: saa7133[0]: dsp access error
May 10 21:34:00 itaca kernel: saa7133[0]/audio: tvaudio thread status:
0x100000 [no standard detected]
May 10 21:34:00 itaca kernel: saa7133[0]/audio: detailed status: #############
init done
-----------------------------------------------
Regards,
--
Benjamí
http://blog.bitassa.cat
.
