Hi list. I'm trying to get etch to boot from an USB-attached harddisk on my notebook but the kernel cannot find the root filesystem. It seems to me, that udev hasn't finished its job by the time the kernel wants to read from the disk so /dev/sda isn't defined yet.
Any ideas as to how I can control the timing of the process? It might entail editing the initrd image - how's that done? I had an initial problem that I think I got solved: On boot, the bios assigns the bootdisk as (hd0) in grubsk whereas during installation grub sees the USB-disk as (hd1). I edited /boot/grub/menu.list, repacing (hd1) with (hd0). It's just that the kernel, when it wakes up, needs to see the disk as /dev/sda and udev (or the disk) isn't fast enough... The first disk (100GB) contains WinXP and I want it to be untouched. Output from dmesg: ---------------- Probing IDE interface ide0... usb 3-1: new high-speed USB device using echi-hcd and address 2 SCSI subsystem initialized Initializing USB Mass Storage driver... hda: SAMSUNG HM100JC, ATA DISK drive scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registred new driver usb-storage USB Mass Storage support registered usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 1-3: new low-speed device using ochi_hcd and address 3 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DC-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x3f7 on irq 15 hda: max request size: 1024KiB hda: 195371568 sectors (100030 MB) w/8192KiB cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 > hdc: ATAPI 24x DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... /scripts/local-top/lvm: 36: vgchange: not found Done. ALERT! does not exist. Dropping to a shell! BusyBox v1.01 (Debian 1:1.01-4) Built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off / # Vendor: HTS54104 Model:0G9AT00 Rev: MB20 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 78140159 512-byte hdwr sectors (40008 MB) sda: assuming drive cache: write through SCSI device sda: 78140159 512-byte hdwr sectors (40008 MB) sda: assuming drive cache: write through sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: Attached scsi disk sda -------------------- TIA Kai Olsen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
