Dear Debian users,
I tired to compile and make a package from the qpopper_4.0.5-4sarge1_amd64
source files after I applied the qpopper-mysql-0.14.patch, but I had got
some problem during the proceudre.
1. I couldn't applie the patch fully by the debian src however there was
no problem with the original qpopper files with the same patch.
(ftp://ftp.qualcomm.com/eudora/servers/unix/popper/old/qpopper4.0.5.tar.gz)
2. By the original qpopper files after the configuration the compilation
finished without any problem but with the debian source it was halted with
the following msg:
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_get_subcommand.c -o pop_get_subcommand.o
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_init.c -o pop_init.o
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_last.c -o pop_last.o
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_list.c -o pop_list.o
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_log.c -o pop_log.o
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_lower.c -o pop_lower.o
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_msg.c -o pop_msg.o
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_parse.c -o pop_parse.o
gcc -c -I.. -I.. -I. \
-I../mmangle -I../common -I/usr/local/ssl/include \
-g -O2 -DHAVE_CONFIG_H -I/usr/include/mysql -DLINUX -DUNIX
pop_pass.c -o pop_pass.o
pop_pass.c: In function `pop_pass':
pop_pass.c:1614: error: `mysqlauth_host' undeclared (first use in this
function)
pop_pass.c:1614: error: (Each undeclared identifier is reported only once
pop_pass.c:1614: error: for each function it appears in.)
pop_pass.c:1614: error: `mysqlauth_username' undeclared (first use in this
function)
pop_pass.c:1615: error: `mysqlauth_password' undeclared (first use in this
function)
pop_pass.c:1615: error: `mysqlauth_db' undeclared (first use in this
function)
pop_pass.c:1616: error: `mysqlauth_port' undeclared (first use in this
function)
make[2]: *** [pop_pass.o] Error 1
make[2]: Leaving directory `/usr/src/qpopper-4.0.5/popper'
make[1]: *** [popper_server] Error 2
make[1]: Leaving directory `/usr/src/qpopper-4.0.5'
make: *** [install] Error 2
please write my any intruduction how can I make a working packege.
thanx
Szabolcs Toth***************
*** 1531,1541 ****
{
int rslt;
char buf [ 256 ];
struct stat stat_buf;
if ( p->bUser_opts ) {
rslt = Qsnprintf ( buf, sizeof(buf), "%s/.qpopper-options",
pwp->pw_dir );
if ( rslt == -1 )
pop_log ( p, POP_PRIORITY, HERE,
"Unable to build user options file name for user %s",
--- 1551,1579 ----
{
int rslt;
char buf [ 256 ];
+ char tempbuf [ 256 ];
struct stat stat_buf;
if ( p->bUser_opts ) {
+ #ifdef MYSQLAUTH
+ /* assumes home directory? */
+ strcpy(tempbuf,pwp->pw_dir);
+ /* tack on domain */
+ if (strcmp(p->domain,"NULL")) {
+ strlcat ( tempbuf, p->domain, sizeof(tempbuf) );
+ strlcat ( tempbuf, "/", sizeof(tempbuf) );
+ }
+ /* tack on hashing */
+ if ( p->hash_spool != 0 ) {
+ strlcat ( tempbuf, get_hash_dir ( p->user, p->hash_spool ),
sizeof(tempbuf) );
+ }
+ /* tack on user */
+ strlcat ( tempbuf, p->user, sizeof(tempbuf) );
+ rslt = Qsnprintf ( buf, sizeof(buf), "%s/.qpopper-options", tempbuf );
+ #else
rslt = Qsnprintf ( buf, sizeof(buf), "%s/.qpopper-options",
pwp->pw_dir );
+ #endif
if ( rslt == -1 )
pop_log ( p, POP_PRIORITY, HERE,
"Unable to build user options file name for user %s",
oracle:/usr/src/qpopper-4.0.5# patch -p1 < qpopper-mysql-0.14.patch
patching file config.h.in
Hunk #1 succeeded at 295 (offset 9 lines).
Hunk #2 succeeded at 616 (offset 14 lines).
patching file configure
Hunk #1 succeeded at 833 (offset 159 lines).
Hunk #2 succeeded at 843 (offset 159 lines).
Hunk #3 succeeded at 878 (offset 159 lines).
Hunk #4 succeeded at 899 (offset 160 lines).
Hunk #5 succeeded at 3168 with fuzz 2 (offset 460 lines).
Hunk #6 succeeded at 4531 with fuzz 2 (offset 539 lines).
Hunk #7 FAILED at 6043.
Hunk #8 succeeded at 8233 with fuzz 2 (offset 438 lines).
1 out of 8 hunks FAILED -- saving rejects to file configure.rej
patching file configure.in
patching file doc/Changes.MAILDIR
patching file doc/Changes.MYSQL
patching file example-maildir-configure.txt
patching file example-mysql-configure.txt
patching file mysql-popper.conf
patching file popper/genpath.c
patching file popper/maildir.c
patching file popper/maildir.h
patching file popper/Makefile.in
patching file popper/msg_ptr.c
patching file popper/pop_conf.c
patching file popper/pop_config.c
Hunk #1 succeeded at 230 (offset 1 line).
Hunk #2 succeeded at 306 (offset 1 line).
Hunk #3 succeeded at 403 (offset 1 line).
Hunk #4 succeeded at 424 (offset 1 line).
Hunk #5 succeeded at 471 (offset 1 line).
Hunk #6 succeeded at 926 (offset 1 line).
Hunk #7 FAILED at 1551.
Hunk #8 succeeded at 1588 (offset -3 lines).
Hunk #9 succeeded at 1682 (offset 27 lines).
1 out of 9 hunks FAILED -- saving rejects to file popper/pop_config.c.rej
patching file popper/pop_dropcopy.c
patching file popper/pop_init.c
Hunk #1 succeeded at 585 (offset 57 lines).
patching file popper/pop_list.c
patching file popper/pop_pass.c
patching file popper/popper.c
patching file popper/popper.h
patching file popper/pop_send.c
patching file popper/pop_uidl.c
patching file popper/pop_updt.c
patching file popper/pop_user.c
patching file popper/pop_util.c
patching file popper/version.h
patching file popper/xtnd_xlst.c
patching file README.MAILDIR
patching file README.MYSQL
***************
*** 5835,5840 ****
DBM_H="no"
fi
echo "$as_me:5299: checking for t_accept in -lnsl" >&5
echo $ECHO_N "checking for t_accept in -lnsl... $ECHO_C" >&6
if test "${ac_cv_lib_nsl_t_accept+set}" = set; then
--- 6043,6093 ----
DBM_H="no"
fi
+ # check for mysql.h
+ if test "$mysql" != "no"; then
+ ac_hdr="$mysqlincludepath/mysql.h"
+ ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ echo $ECHO_N "checking for $ac_hdr... $ECHO_C" 1>&6
+ echo "configure:3755: checking for $ac_hdr" >&5
+ if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" 1>&6
+ else
+ cat > conftest.$ac_ext <<EOF
+ #line 3760 "configure"
+ #include "confdefs.h"
+ #include <$ac_hdr>
+ EOF
+ ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ { (eval echo configure:3765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ ac_err=`grep -v '^ *+' conftest.out`
+ if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+ else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ eval "ac_cv_header_$ac_safe=no"
+ fi
+ rm -f conftest*
+ fi
+ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: "mysql.h not found"" 1>&2;
+ echo "Try specifying your mysql include path with
--with-mysqlincludepath=path" 1>&2;
+ exit 1; }
+ fi
+
+ echo "$ac_t""Turning on mysql authentication" 1>&6
+ cat >> confdefs.h <<\EOF
+ #define MYSQLAUTH 1
+ EOF
+
+ fi
+ # check for mysql.h
+
echo "$as_me:5299: checking for t_accept in -lnsl" >&5
echo $ECHO_N "checking for t_accept in -lnsl... $ECHO_C" >&6
if test "${ac_cv_lib_nsl_t_accept+set}" = set; then
