On Thu, Apr 06, 2006 at 03:52:51PM +0200, Florian Kulzer wrote: > OK, so at the moment both are not installed, but their configuration > files are still present. The last versions that were installed > correspond to the old "matching pair" from Sarge. These were probably > removed because of dependency conflicts during the upgrade. udev was > most likely not replaced because the Etch version needs a newer kernel > (2.6.12 or higher). I guess the best thing to do is to install the > appropriate linux-image-2.6.15, boot into it and then reinstall udev. > (I am not 100% sure here, it might also be possible to reinstall udev > before booting into the new kernel.) You will probably see a message > which asks you to purge the hotplug configuration scripts. After you do > so, run "udevsynthesize" as root and I would hope that then your > /dev/input/mouse.. devices will work normally again. > > Regards, > Florian
Thank you, Florian, I'll try this out in the evening. I think this should work, it sounds right. Thanks again. /severino -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
