Hello List,
I am running 2x Seagate 250GB SATA-II 7200.9 disks configured as linux
software RAID-1.
The following errors occasionally appear in /var/log/kern.log:
kernel: ata1: translated ATA stat/err 0x51/84 to SCSI
SK/ASC/ASCQ 0xb/47/00
kernel: ata1: status=0x51 { DriveReady SeekComplete Error }
kernel: ata1: error=0x84 { DriveStatusError BadCRC }
I had assumed I have a bad disk, but the odd thing is when I connect
either disk individually I can use DD to fill it with zeros to its
capacity without any errors.
Do you think I have a bad disk, or should I suspect a problem with my
SATA controller or RAID-1 setup?
Thanks, Andy
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
