Egor Tur wrote:
Hi folk.
I have two identical usb mouse which pluged to one comp with two head.
I use Xorg 6.9.0.dfsg.1-2 and udev 0.086-1 and kernel 2.6.15.5
In xorg.conf I write rules for this usb mouse as
Driver "mouse"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mouse0"
and
Driver "mouse"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mouse1"
And this work correctly for my two head comp but sometime mouses changes their
input devices.
And after this usb mouse defined in system as /dev/input/mouse2 and so on.
I try write udev rule for this mouses ( for example /dev/input/mouse_head0 and
/dev/input/mouse_head1)
but I cannot know what paramiters I must use for separation one mouse from
another.
I try for example in /etc/udev/local.rules (symlink from
/etc/udev/rules.d/@z10_local.rules):
BUS=="input", SYSFS{phys}=="usb-0000:00:1d.0-2/input0", SYSFS{name}=="Genius NetScroll + Traveler",
KERNEL=="mouse?", NAME="input/%k", MODE="0660", SYMLINK+="input/mouse_head0"
BUS=="input", SYSFS{phys}=="usb-0000:00:1d.1-1/input0", SYSFS{name}=="Genius NetScroll + Traveler",
KERNEL=="mouse?", NAME="input/%k", MODE="0660", SYMLINK+="input/mouse_head1"
But nothing created in /dev/input/mouse_headX.
Hi,
Just to make sure: Did you run "udevsynthesize" after you added the
rules?
Regards,
Florian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
