On Mon, 13 Mar 2006 11:54, Andrew Sackville-West wrote: > On Fri, 10 Mar 2006 22:37:42 -0600 > > "Forrest Fuqua | JRWR | Woody" <[EMAIL PROTECTED]> wrote: > > im trying to install debian on a hardrive that is on a ite 8212 card > > in IDE/ATAPI mode, so far ive had no luck at all, i whant to install > > debian testing if i can, (with the linux26) > > ite 821x modules are in the 2.6.14 or later kernel. you need an installer > with that kernel. how you get that is another matter. You might have to > roll your own. > > or do what I did. install the bare minimum sarge on an extra disk using a > recognised interface. then upgrade that bare-minimum install to a 2.6.14 > kernel (sid/unstable I believe, I don't think its in etch, others will > pipe-up I'm sure). then you cann see, partition and format the ite drives > and move your installation over there. > > or you could install through a recognized interface and upgrade as > before, then just unplug and replug your disk into the other interface. > make sure you handle your boot manager properly first though. > > A
2.6.15 is now in testing (aka etch). Try the one of the etch_di_beta2 or daily_builds cds from http://cdimage.debian.org/cdimage/ hth Andrew Etch now includes > > > -- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
