[EMAIL PROTECTED] wrote:

------------------------------------------------------------------------


debian-user-digest Digest                               Volume 2006 : Issue 527

Today's Topics:
  Re: Debian 3.1 on a Dell PowerEdge 2  [ Ivan Teliatnikov <[EMAIL PROTECTED] ]
  Re: ready to use debian or ubuntu la  [ "B.Hoffmann" <[EMAIL PROTECTED] ]
  xfrm_user: Unknown SA event 0         [ Richard <[EMAIL PROTECTED]> ]
  Re: Messages from my firewall         [ Adam Hardy <[EMAIL PROTECTED] ]
  Re: Re: Messages from my firewall     [ Clyde Wilson <[EMAIL PROTECTED]> ]
  Re: taking image of disk and clonnin  [ "Doug Miller" <[EMAIL PROTECTED]> ]
  Re: Graphics Drivers (I'm new to Lin  [ "Roberto C. Sanchez" <[EMAIL 
PROTECTED] ]
  Graphics Drivers (I'm new to Linux)   [ [EMAIL PROTECTED] ]
  Re: gstreamer, esd, arts, and other   [ "Kelly Clowers" <[EMAIL PROTECTED] ]
  Re: sata/scsi confusion at boot       [ Glenn English <[EMAIL PROTECTED]> ]
  Re: Graphics Drivers (I'm new to Lin  [ kamaraju kusumanchi <raju.mailingli ]
  Re: pppd doesn't connect              [ [EMAIL PROTECTED] (Bill Marcum) ]
  Re: Graphics Drivers (I'm new to Lin  [ david robert <[EMAIL PROTECTED] ]
  Re: I'm looking for a better XShell   [ jlmb <[EMAIL PROTECTED]> ]
  Re: Graphics Drivers (I'm new to Lin  [ "H.S." <[EMAIL PROTECTED]> ]
  Re: only root can access the camera   [ ochnap2 <[EMAIL PROTECTED]> ]
  Re: NVidia Freeze                     [ Hugo Vanwoerkom <[EMAIL PROTECTED] ]
  samba Q                               [ Gene Heskett <[EMAIL PROTECTED] ]
  Re: I'm looking for a better XShell   [ Magnus Therning <[EMAIL PROTECTED] ]


------------------------------------------------------------------------

Subject:
Re: Debian 3.1 on a Dell PowerEdge 2800 Server
From:
Ivan Teliatnikov <[EMAIL PROTECTED]>
Date:
Fri, 03 Mar 2006 23:17:28 +1100
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


On Thu, 2006-03-02 at 14:56 -0500, Yu,Glen [Ontario] wrote:

Hi everyone,


Have a look at
Confluence - Debian on Dell Servers
http://wiki.osuosl.org/display/LNX/Debian+on+Dell+Servers

It has Debian Sarge installation disk with various drivers included.

Good luck!


I'm plan on installing Debian 3.1 (2.4.27 kernel) on a Dell PE2800 server soon 
(just waiting for a few more pieces of equip. to arrive) and while I have used 
Debian a little bit in the past, I've never installed in on a server before.  I 
was hoping somebody who has done this before can give me some tips/info on the 
following:

        1) does/will Debian have issues if I use the hw RAID controller on the 
Dell server?

        2) the server will have dual Xeon processors and 8GB of RAM, does Debian 
suppor this? (I've read in some places that Debian doesn't support > 4GB of 
RAM, etc. but I haven't been able to get a definite answer to that from googling)

Thanks in advance.

Cheers,

Glen Yu | 416-739-4861 | [EMAIL PROTECTED]
Modelling & Integration Research Section
Science and Technology Branch
Environment Canada
4906 Dufferin St., Downsview, ON, M3H 5T4




------------------------------------------------------------------------

Subject:
Re: ready to use debian or ubuntu laptop reccomendations? - slightly OT
From:
"B.Hoffmann" <[EMAIL PROTECTED]>
Date:
Sat, 04 Mar 2006 13:43:15 +0000
To:
Debian <debian-user@lists.debian.org>

To:
Debian <debian-user@lists.debian.org>


On Sat, 2006-03-04 at 13:04 +0000, B.Hoffmann wrote:

with free calls from the UK to the US
where their support centre was


Sorry, I believe Quantex were a Canadian company actually.


------------------------------------------------------------------------

Subject:
xfrm_user: Unknown SA event 0
From:
Richard <[EMAIL PROTECTED]>
Date:
Sat, 4 Mar 2006 22:20:45 +0800
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


i just got a Xserver crash and found this lonely message in my
/var/log/messages happening about 5 minutes before the crash. Can
somebody explain what it means?

thanks


------------------------------------------------------------------------

Subject:
Re: Messages from my firewall
From:
Adam Hardy <[EMAIL PROTECTED]>
Date:
Sat, 04 Mar 2006 14:48:23 +0000
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org
CC:
Debian <debian-user@lists.debian.org>


Florian Kulzer on 03/03/06 09:15, wrote:

Clyde Wilson wrote:

I have Debian Sarge 3.1 r1 with Firestarter as my
firewall and I am on DSL.  The firewall works great
but I am receiving messages every minute or two with
the following format:

Inbound IN=eth0 OUT=
MAC=00:0f:b5:46:4f:5a:00:0b:23:ca:68:ec:08:00

[...]

These messages appear on my virtual terminals, whether
I am logged on or not.  Any way to get rid of them.



This behavior can be controlled via the "printk" parameter of the
kernel. Try the command (as root)

echo "4 4 1 7" > /proc/sys/kernel/printk

If you like this setting you can make it permanent over reboots by
uncommenting the following line in /etc/sysctl.conf:

kernel/printk = 4 4 1 7

More information about kernel parameters can be found in the file
Documentation/sysctl/kernel.txt which is part of the kernel sources and
the kernel documentation packages (e.g linux-doc-2.6.15). I have
appended the part pertaining to printk below.


Adjusting the levels of logging to your console though will affect all programs, so bear in mind if you raise the filtering level to cut out more logging, it will cut out logging from all applications.

Even though I don't know how you would adjust Firestarter, it should have config options to control its logging for itself.

Just looking into firewalls myself, that's why I chipped in.

Adam

------------------------------------------------------------------------

Subject:
Re: Re: Messages from my firewall
From:
Clyde Wilson <[EMAIL PROTECTED]>
Date:
Sat, 4 Mar 2006 08:15:03 -0800 (PST)
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


Thanks Adam, that's good advice.  I'll check on my firewall options.
------------------------------------------------------------------------

Subject:
Re: taking image of disk and clonning it
From:
"Doug Miller" <[EMAIL PROTECTED]>
Date:
Sat, 4 Mar 2006 11:25:02 -0600
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


If you want OSS I'm not the one to ask.  We've deployed a nice setup
with Norton Ghost though. Works well even for Linux/BSD servers. Get's used on a daily basis.

HTH,

Doug Miller

On 3/3/06, Bart van den Heuvel <[EMAIL PROTECTED]> wrote:

Hi,

I had mixed results with Mondo. http://www.mondorescue.org

It will create a bootable iso, dvd/cdrom or tape archive of your system.
You can select parts of your system also. The speed is ok, but i don't
have much to compare...

If you have a plain install (stock kernel, no lvm) you might have success
on the first go. I had a problem with LVM2, had to remove MAPPER from the
entries in fstab. Also some problems with large filesystems, part from
that al went OK!

Gr,

Bart



hi,
i`m using dd to take an image of whole disk, but as usual dd saves every
bit even it is 0, so saving and writing that image to several hd devices
(aka clonning) takes long time, i tried partitionimage packet provided
by sarge but it does no support to swap and image of whole disk, i can
only take the image of ext2,ext3,reiserfs and ntfs partitions but the
speed is fine, can you suggest any program like the mix of dd and
partitionimage.
thanks.


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]





--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]




------------------------------------------------------------------------

Subject:
Re: Graphics Drivers (I'm new to Linux)
From:
"Roberto C. Sanchez" <[EMAIL PROTECTED]>
Date:
Sat, 04 Mar 2006 12:50:01 -0500
To:
[EMAIL PROTECTED]

To:
[EMAIL PROTECTED]
CC:
debian-user@lists.debian.org


[EMAIL PROTECTED] wrote:

Hello fellow Debian Users!

I'm new to Linux and I heard good things about Debian so I decided to give
it a try. I've actually been meaning to try it for over a year now, but I
went ahead and downloaded the net install and got it installed.

However, my previous Linux encounters were just tests and never lasted
longer than two weeks. My goal is to migrate over to Linux and start doing
90% of my work on Linux (the other 10% requires Windows).

But during this migration over, I've hit a brick wall. I need to get my
NVIDIA drivers installed. I've figured out after 100 searches what to do
and found a person with the exact same problem as me. I unfortunately lost
the link, but I did manage to scribble down some instructions.

Here's my problem: I need to get the kernel source to get the NVIDIA
drivers in. I'm using Debian 3.1, the latest.

Thanks for any help. I've found myself going in circles on the net trying
to get these drivers installed!

Best regards,

Travis Newton




Follow the instructions on this page:

http://home.comcast.net/~andrex/Debian-nVidia/index.html

-Roberto


------------------------------------------------------------------------

Subject:
Graphics Drivers (I'm new to Linux)
From:
[EMAIL PROTECTED]
Date:
Sat, 4 Mar 2006 17:42:30 -0000 (UTC)
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


Hello fellow Debian Users!

I'm new to Linux and I heard good things about Debian so I decided to give
it a try. I've actually been meaning to try it for over a year now, but I
went ahead and downloaded the net install and got it installed.

However, my previous Linux encounters were just tests and never lasted
longer than two weeks. My goal is to migrate over to Linux and start doing
90% of my work on Linux (the other 10% requires Windows).

But during this migration over, I've hit a brick wall. I need to get my
NVIDIA drivers installed. I've figured out after 100 searches what to do
and found a person with the exact same problem as me. I unfortunately lost
the link, but I did manage to scribble down some instructions.

Here's my problem: I need to get the kernel source to get the NVIDIA
drivers in. I'm using Debian 3.1, the latest.

Thanks for any help. I've found myself going in circles on the net trying
to get these drivers installed!

Best regards,

Travis Newton


------------------------------------------------------------------------

Subject:
Re: gstreamer, esd, arts, and other black magic
From:
"Kelly Clowers" <[EMAIL PROTECTED]>
Date:
Sat, 4 Mar 2006 09:55:58 -0800
To:
"debian users" <debian-user@lists.debian.org>

To:
"debian users" <debian-user@lists.debian.org>


On 3/3/06, Adam Porter <[EMAIL PROTECTED]> wrote:

I've never used esd or arts since I switched my desktop to Debian about a
year ago.  I've always used just plain ALSA, and it's always worked great.
For GNOME, you can use GConf to set the outputsink to use the alsasink, and
in KDE you can simply select it in kcontrol.  I really don't know what
Firefox uses, or how it decides, but I've never had to change anything on
it.


I always use plain Alsa as well, since I use fluxbox instead of KDE or Gnome.
Firefox does not have anything to do with sound directly, the plugins
handle that, and they will usually use whatever has been configured
for the desktop.

GStreamer is going to replace esd and probably arts as well (I don't
think they have a final decision yet). I don't know how good 0.10
really is, but 0.8 + amarok didn't work out for me.

GStreamer is a flexible media framework and can actually output to
alsa and oss (and esd and arts, I think). Here is a good article about
it (pre 0.8): http://www.osnews.com/story.php?news_id=5648&page=1


------------------------------------------------------------------------

Subject:
Re: sata/scsi confusion at boot
From:
Glenn English <[EMAIL PROTECTED]>
Date:
Sat, 4 Mar 2006 11:14:11 -0700
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


On Friday 03 March 2006 22:20, Andrew Cady wrote:


How grub names and finds drives is completely unrelated to how linux
does it.  If your problem is with grub's behavior, then /dev/sd? and
udev are definitely not involved.


Good to know I was looking at the wrong thing. In menu.lst, root is hd0,0, so grub finds the boot partition, and all is well. By the time it gets to the line saying the kernel in in /dev/hda1, hda is not the SCSI drive. Why? Is there a way to deal with this? How did you find how this is all working (I can't find documentation)?



------------------------------------------------------------------------

Subject:
Re: Graphics Drivers (I'm new to Linux)
From:
kamaraju kusumanchi <[EMAIL PROTECTED]>
Date:
Sat, 04 Mar 2006 13:30:35 -0500
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org
CC:
debian-user@lists.debian.org


[EMAIL PROTECTED] wrote:

Here's my problem: I need to get the kernel source to get the NVIDIA
drivers in. I'm using Debian 3.1, the latest.

You can try

http://wiki.debian.org/NvidiaGraphicsDrivers?highlight=%28nvidia%29

It is very sad that nvidia is not making their drivers open source. I wonder if they are really gaining anything in the end (with all the discomfort caused to their end users using Linux).

raju


------------------------------------------------------------------------

Subject:
Re: pppd doesn't connect
From:
[EMAIL PROTECTED] (Bill Marcum)
Date:
Sat, 4 Mar 2006 12:35:41 -0500
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


On Fri, Mar 03, 2006 at 05:48:08PM -0500, Fabián Barco wrote:

Hi,
I have Debian GNU/Linux 3.1 r0.
The modem was working ok!
but now the modem doesn't connect.
I have the following message in the /var/log/syslog file
tcflush failed: Bad file descriptor
tcsetattr: Invalid argument (line 1010)

I was trying setup a ldap + samba server, I modified the
/etc/pam.d/common-xxxx files. It is that I remember.

I have pctel modem, HPS56 MicroModem on pc100 board.
Which is the problem? and
How to can I solve it?
thanks!


Probably a winmodem.  Try http://linmodems.org or buy an external modem.




------------------------------------------------------------------------

Subject:
Re: Graphics Drivers (I'm new to Linux)
From:
david robert <[EMAIL PROTECTED]>
Date:
Sat, 4 Mar 2006 18:36:42 +0000 (GMT)
To:
[EMAIL PROTECTED], debian-user@lists.debian.org

To:
[EMAIL PROTECTED], debian-user@lists.debian.org


try here good place for nvidia drivers in debian
http://www.debianhelp.co.uk/nvidia.htm

*/[EMAIL PROTECTED]/* wrote:

    Hello fellow Debian Users!

    I'm new to Linux and I heard good things about Debian so I
    decided to give
    it a try. I've actually been meaning to try it for over a year
    now, but I
    went ahead and downloaded the net install and got it installed.

    However, my previous Linux encounters were just tests and never
    lasted
    longer than two weeks. My goal is to migrate over to Linux and
    start doing
    90% of my work on Linux (the other 10% requires Windows).

    But during this migration over, I've hit a brick wall. I need to
    get my
    NVIDIA drivers installed. I've figured out after 100 searches
    what to do
    and found a person with the exact same problem as me. I
    unfortunately lost
    the link, but I did manage to scribble down some instructions.

    Here's my problem: I need to get the kernel source to get the NVIDIA
    drivers in. I'm using Debian 3.1, the latest.

    Thanks for any help. I've found myself going in circles on the
    net trying
    to get these drivers installed!

    Best regards,

    Travis Newton


-- To UNSUBSCRIBE, email to [EMAIL PROTECTED]
    with a subject of "unsubscribe". Trouble? Contact
    [EMAIL PROTECTED]


------------------------------------------------------------------------
Win a BlackBerry device from O2 with Yahoo!. *Enter now* <http://us.rd.yahoo.com/mail/uk/taglines/default/mobile_o2/*http://www.yahoo.co.uk/blackberry>.
Subject:
Re: NVidia Freeze
From:
Hugo Vanwoerkom <[EMAIL PROTECTED]>
Date:
Sat, 04 Mar 2006 13:02:50 -0600
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


Tim Wood wrote:

[EMAIL PROTECTED] wrote:


------------------------------------------------------------------------


debian-user-digest Digest                Volume 2006 : Issue 525

Today's Topics:
  NVIDIA Freeze                         [ Keats <[EMAIL PROTECTED]> ]


------------------------------------------------------------------------

Subject:
NVIDIA Freeze
From:
Keats <[EMAIL PROTECTED]>
Date:
Fri, 3 Mar 2006 08:58:52 +0100
To:
debian-user@lists.debian.org

To:
debian-user@lists.debian.org


hello, i ve tried all i can do but whatever i do, if i use the driver "nvidia" it freeze my computer. i m tired of doing hard reboots after tests thanx if there is any suggestion


<snip>

But your included conf shows driver nv.
Do you get the problem with nv or nvidia?

OK. I should have emphasized that the problem occurs with the NVidia driver. The "nv" should be "nvidia".

It drove me crazy when I first tried using the proprietary Nvidia driver, feezes, partial screens etc. Depending on which driver you are using, and where you get it from, there should be a Readme file. That goes through all the options. I can't remember if it is included in the debian packaged version. The latest driver direct from Nvidia, I think, includes it. There were some drivers that did not include the GeForce4 420 Go.

Hope that makes it clearer.

Tim


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to