Hi,
first of all, I am new to the linux scene so bear with me. I have just
installed ipmasq. I want to allow an ipaq connected to my debian system to
connect to the internet. So when I installed ipmasq, I chose the "yes" when
it asked if I wanted ppp to reconfigure the firewall. I then started pppd
using
/usr/sbin/pppd /dev/ttyS0 115200 192.168.0.1:192.168.0.2 debug logfile
~/ppplog nodetach local noauth nocrtscts lock user ppp connect
"/usr/sbin/chat -v -t3 ogin--ogin: ppp" &
Although I can ping the ipaq from debian and vice versa, I cannot connect to
the internet. Also I see these messages when I do dmesg:
IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:04:4e:c8:c8:0a:08:00
SRC=129.21.147.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=48399
PROTO=2
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:04:4e:c8:c8:0a:08:00
SRC=129.21.147.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=49500
PROTO=2
IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:04:4e:c8:c8:0a:08:00
SRC=129.21.147.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=53897
PROTO=2
I would expect the out to be ppp0 or something. ifconfig gives this:
ppp0 Link encap:Point-to-Point Protocol
inet addr:192.168.0.1 P-t-P:192.168.0.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:107 (107.0 b) TX bytes:99 (99.0 b)
Anybody has clue what is going on. I hope someone can help me out. Thanks a
lot
Amish
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
