[[[ Please "Cc:" me, as I'm not subscribed to the list. ]]] I admit it. I'm spoiled. I have come to expect Linux setups to just "work", so when they don't I'm quite tenacious in trying to fix things. Currently, I'm trying to get an APPRO 1124i system (http://www.appro.com) to work using the Linux 2.4.18 native ataraid support. This PC Class server is using the Tyan Thunder K7 motherboard, dual AMD MP2400+ processors, 1GB DDRAM, and the Promise FastTrak TX2 100 PCI card. I have the 4 disk Array Configured in "Security" mode or Mirror/Stripe.
I'm booting with LordSutch's Debian Woody 2.4.18-bf2.4 kernel, which has ataraid support compiled in (yes, I know this is a Red Hat list). The machine boots successfully off of CD and recognizes the ataraid device correctly. I've been able to partition and format the ataraid device with a working Debian install. What I cannot seem to accomplish is to boot the system off this raid device: /dev/ataraid/d0. Grub simply won't ackowledge the ataraid device as useable and instead just lists the four physical drives as being available. lilo 22.2-3 installs into the MBR, but fails with "L 01 01 01 01...". lilo 22.5.4 installs, but instead fails at boot time with "L 99 99 99 99 99". Apparently something was fixed between 22.2 and 22.5 to allow lilo to see the device correctly, but now it doesn't seem to want to accept the detected geometry as correct. I've compared the geometry as reported by the Promise card at boot time with the geometry from the lilo diagnostic disk (compiled from 22.5.4 source), and they match perfectly. I have not touched the /dev/hd[e-h] devices as directed by the FAQ's, etc. I honestly don't know what else to do. I don't know if this problem is isolated to lilo or if it's influenced by what the initial kernel is reporting to lilo. Should I be upgrading the installation kernel to 2.4.20? 2.4.21-preX? Does the ataraid driver support the mirror/stripe configuration I'm using, or am I being naieve? Advice? Flames? Etc. -- Chad C. Walstrom <[EMAIL PROTECTED]> 247 Gortner Hall Asst. Coordinator of IT Help: 612-625-9284 CBS Computing Services, UMN Phone: 612-624-2918 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
