for routing info,
# route
[EMAIL PROTECTED] ~]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.117.80.0 * 255.255.252.0 U 0 0 0
eth0
169.254.0.0 * 255.255.0.0 U 0 0 0
eth0
default 10.117.80.1 0.0.0.0 UG 0 0 0
eth0
[EMAIL PROTECTED] ~]#
or
# ip route
[EMAIL PROTECTED] ~]# ip route
10.117.80.0/22 dev eth0 proto kernel scope link src 10.117.80.40
169.254.0.0/16 dev eth0 scope link
default via 10.117.80.1 dev eth0
[EMAIL PROTECTED] ~]#
see the src part... that sets my from address which is assigned..
also check
ip addr
[EMAIL PROTECTED] ~]# ip addr
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:12:3f:42:15:10 brd ff:ff:ff:ff:ff:ff
>> inet 10.117.80.40/22 brd 10.117.83.255 scope global eth0
>> inet 10.10.10.10/24 scope global eth0 (MY SECONDARY UP)
inet6 fe80::212:3fff:fe42:1510/64 scope link
valid_lft forever preferred_lft forever
3: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
[EMAIL PROTECTED] ~]#
Kegan Holtzhausen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
