On Sat, 26 Nov 2005 03:51:43 +0100 pascal <[EMAIL PROTECTED]> wrote: > > > > Did you try the card on another pci slot ? It seens a IRQ conflict. > > Eduardo > On Sat, 26 Nov 2005 03:40:14 +0100 > pascal <[EMAIL PROTECTED]> wrote: > > Yes , I did. > Several pci-slots. My thoughts where the same. > Should be some irq sharing error, but when you swap the card to another > pci-slot it should use another irq. But the problem persists. > > Maybe some I/O error, or memory adress error. But I don't know how to check > this. > > Thx. > > > Hello, > > Yesterday, I bought myself a hardware raid card. The promise supertrak > sx6000. > Inserted it in my intel 815e board. Booted up in kernel 2.6.14-2-686. > > Problem: > With the card inserted in the pci-slot, Xfree86 fails to start. > Claiming it can't find my vga-card. After removing the adapter card, > everything works fine. > > I already tried to insert the module provided by the kernel for promise > cards. > Module: pdc202xx.old > > Only I have no idea if this is a module which should work, for this > card. Obviously it doesn't, since the problems are persistand. > > Is there anyone who can help me overcome this problem? Or do I need to > buy something else? > > Thx in advance. > > > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of > "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
You can try, to check any memory problem, with memtest 86, it's very good!! Eduardo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
