On (29/06/05 08:25), Kristian Rink wrote:> Hi Mike;> > and, at first, thanks loads for your mail.> > [EMAIL PROTECTED] schrieb:> > > I found it easier not use the mdadm.conf file at all. I simply deleted> > it.> > However, without it, your partitions and/or disks that are going to be> > used in your raid array must be fdisk'd to type "fd" or Linux Raid> > autodetect.> >> Yeah, I read about this and did this,all partitions to be used within> the array are type "FD". Even though this doesn't seem to change anything.> > > Then create your array, format it, mount it, set it in /etc/fstab and> > reboot.> > It should work. Perhaps give us some details of your /proc/mdstat or> > try hunting through dmesg to see if there any errors when the array is> > trying to be built upon a boot up.> > I'm hardly able to do any diagnostics on that since the information I> get is pretty limited. Basically, I created the array, xfs-formatted it,> put it into fstab and mounted it - worked well. Umounting, remounting> and everything worked as long as the array was running. After rebooting,> the array seemed gone. I don't get any useful error messages, just an> "XFS SB error" when trying to mount the array (which is not running at> this time), and when I try to start the array (mdadm -R /dev/md0), I> just get something like "/dev/md0 has no devices" (though the real> behaviour and message changes differing with the kernel version used).>
Just recreate initrd.img (man mkinitrd) after all RAID
puzzle is done, reboot and be happy -- "Tumbleweed E-mail Firewall <tumbleweed.com>" made the following |
