I don't quite understand. Are you saying my tuner is being incorrectly set by bttv despite it saying "bttv0: using tuner=33"?
In the Netherlands we use PAL, if you meant to say that I needed NTSC. On 10/19/05, mikepolniak <[EMAIL PROTECTED]> wrote: > On 09:28 Wed 19 Oct , wvl wrote: > > Hello, > > > > I'm having trouble getting my Pinnacle PCTV Pro to work, which I > > bought in the Netherlands (europe) a few (2?) years ago. > > > > After loading bttv I only get snow on the top of the screen.. > > everything below that seems to be frozen in a certain state. > > > > Any help would be greatly appreciated. Various system output: > > > > Custom compiled kernel, no patches 2.6.13.4 > > > > lspci -v: > > > snip > > bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option] > > bttv0: gpio: en=00000000, out=00000000 in=00fffbdf [init] > > bttv0: i2c: checking for MSP34xx @ 0x80... found > > bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes > > My Pinnacle (card=39) shows NTSC for the video mode: > "tuner 2-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)" > > Your line shows "PAL+SECAM" which probably is causing the... > "Fatal Error: PLL's didn't lock." > > Although the PLL can be set with ismod options PLL=1 or PLL=2. > > > One thing that seems to be wrong is this: "tuner 0-0060: MT2032 Fatal > > Error: PLLs didn't lock.", but googling on it doesn't provide any > > useful info. > > Your Pinnacle manual will probably state that its only PAL+SECAM and > not NTSC, so it won't work in NA. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > >
