On Wed, 14 Sep 2005, Roberto C. Sanchez wrote: > Any ideas? 1. Switch to 2.6.13. 2. Use the ATAPI interface (not scsi emulation). 3. Use a backport of sid's cdrecord which has some important fixes.
That should do it. Oh, and make triple sure you have ATAPI DMA capabilities enabled or you WILL get buffer underruns at high speeds (usually, hdparm -d1 -u1 <device> is enough to force it enabled). 2.6.13 should be able to do it with pretty much all common south bridges capable of it (which is just about all new ones, AFAIK), with the notable exeption of ATAPI PATA devices behind a PATA-SATA bridge in a SATA channel (like the one in my Thinkpad T43 :-( ). Some PCI IDE controllers are NOT capable of ATAPI DMA, but these are relatively old, and unlikely to be found on any new motherboards or PCI expansion cards. -- "One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
