2005/9/12, Erdi Balint <[EMAIL PROTECTED]>: > Hi Wang, > > Thanks for the support. Unfortunately, it did not work. > > Finally I could burn a cd with the dev=/dev/hdc setting but I could not > read the freshly read cd after, the error message was 'Unable to > identify CD-ROM format.' Which mode do you burn disks in? Raw96r?
You can try cdrecord dev=ATA:1,0,0 -scanbus for me, I did not indicate any additional parameter when burning CD, just use ``tao'' mode as default. good luck! > > Thank you, > Balint > > > Wang Xu wrote: > > 2005/9/11, Erdi Balint <[EMAIL PROTECTED]>: > > > >>Have any of you managed to burn cd-s with kernel 2.6.10? (cdrecord > >>explicitly says that there can be issues with kernel 2.6.x but I figured > >>these could be sorted out somehow). Or maybe with kernels 2.6.x (x<10)? > >>Could you advise anything in this matter? Has the ide_cd solution > >>developped overtime and can now be used? > >> > > > > Yes, it posts warnings, but it works perfect with parameter > > "dev=ATA:1,0,0" with my ASUS M2416NE laptop and my desktop. > > > > have fun > > > > Wang Xu > > > > > > -- ====================================================== WANG, Xu Ph.D. Candidate Service & Terminal lab, Wireless Technology Innovation Institute, Beijing University of Posts & Telecommunications (BUPT) Postal Add.: P.O. Box 92#, BUPT, Bei Jing 100876, China Tel.: +86-10-62283699 ext. 311 Fax.: +86-10-62283553 E-mail: [EMAIL PROTECTED] Blog: http://gnawux.blogchina.com ======================================================
