Hello Ravindra, I did not yet install debian on the DL360, but you still might want to read my notes on the DL380G4 which I basically just posted at the mailing list for another threat named *hp dl360 and smart array 6i* (below the line)
If I remember correctly , installing debian on the 336 went without a hitch, once we found that we had to extract the scsi driver from he smart array cd or what ibm calls it. We did not have sata drives , so I cant comment on it. When installing RHEL 3 on the DL380G4 I felt that installing the DL380G4 is NOT for beginners, especially not with the smart array 6i controller and the internal tape drive. You may run into similar issues with your 360. However, comparing the 336 with the HP DL380G4 I liked the physical layout of the DL380G4 machine and seems like it gives you more *bang for the buck* I hope that you find the notes useful. Keep asking if you need more info. Best regards Nils Valentin Tokyo / Japan http://www.be-known-online.com ----------------------------------------------------------------------------------- I am not sure if this helps you, but I thought I add my experience. I have recently installed 3x DL380G4s all with the Smartarray 6i controllers and RHEL 3 Update 3. I did upgrade to the ProLiant Support Pack for Red Hat Enterprise Linux 3 Version 7.30 (including the Smart array driver version 2.36). http://www1.jpn.hp.com/products/software/oe/linux/mainstream/support/doc/option/array.html I had to start the installation with the option *Linux dd* and insert the cd containing the scsi driver. If I remember correctly, than the scsi driver was included in the Support Pack CD and we had to extract a file - module to the cd with the dd command f.e. *dd if=/mnt/cdrom/module.img of=/mnt/cdrecorder* http://welcome.hp.com/country/us/en/support.html http://h18000.www1.hp.com/support/files/server/us/family/model/5561.html?submit.y=0&submit.x=5&lang=en&cc=us http://h18000.www1.hp.com/support/files/server/us/locate/101_5561.html#27 We did not install Debian Linux, but it seemed like the procedure would also work for Debian. If you can install Debian, but you cant access the scsi discs (probably raid) afterwards it means you have to patch the kernel. There was a document available actually describing this pretty good, also we finally didnt need it. http://www1.jpn.hp.com/products/software/oe/linux/mainstream/bin/support/doc/option/array/cpq_cciss-2.4.50-30.rhel3.i386.dd.gz.txt http://www1.jpn.hp.com/products/software/oe/linux/mainstream/support/doc/option/array.html We had to add additional procedures for the internal Tape drive xx7438c. On the homepage it explains how to setup a enable-scsi script which would allow to see and access the tape drive. Also the tape must first be formatted in the obsr ?? format (or what it was called see front of tape drive for the label) - you do this in the smartarray setup. SmartArray/cciss / TAPE Support： http://www1.jpn.hp.com/products/software/oe/linux/mainstream/support/doc/option/array/tape_cciss.html # cat /etc/rc.d/init.d/cciss-engage for x in /proc/driver/cciss/cciss[0-9]* do echo "engage scsi" > $x done # chmod 755 /etc/rc.d/init.d/cciss-engage # ln -s /etc/rc.d/init.d/cciss-engage /etc/rc.d/rc1.d/S99cciss-engage # ln -s /etc/rc.d/init.d/cciss-engage /etc/rc.d/rc3.d/S99cciss-engage # ln -s /etc/rc.d/init.d/cciss-engage /etc/rc.d/rc5.d/S99cciss-engage # # ls -l /etc/rc.d/rc5.d/S99cciss-engage lrwxrwxrwx 1 root root 29 7月 22 13:15 /etc/rc.d/rc5.d/S9 9cciss-engage -> /etc/rc.d/init.d/cciss-engage # ls -l /etc/rc.d/rc3.d/S99cciss-engage lrwxrwxrwx 1 root root 29 7月 22 13:15 /etc/rc.d/rc3.d/S9 9cciss-engage -> /etc/rc.d/init.d/cciss-engage # ls -l /etc/rc.d/rc1.d/S99cciss-engage lrwxrwxrwx 1 root root 29 7月 22 13:15 /etc/rc.d/rc1.d/S9 9cciss-engage -> /etc/rc.d/init.d/cciss-engage # cd /etc/rc.d/rc1.d # ls -l S99cciss-engage lrwxrwxrwx 1 root root 29 7月 22 13:15 S99cciss-engage -> /etc/rc.d/init.d/cciss-engage Make sure only one entry in /etc/modules.conf is for the *alias scsi_hostadapter1 cciss*. Finally restart the machine and see if the TAPE drive is seen. Confirm with *cat /proc/scci/scsi* If you use HPs UPS f.e the X3000R and you may want to use the SMTP option then you will need Power Manager version 4.x (not 3.x) PM4.0 http://www1.jpn.hp.com/products/software/oe/linux/mainstream/support/doc/general/mgmt/ups/pm/v40/index.html PM4.0Manual(PDF) ftp://ftp.jpn.hp.com/products/servers/proliant/manuals/333101-194-j.pdf Download http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/software/power-manager/index.html I wrote this now mostly out of my head, as you can see its pretty messed up and I might have missed something. Just keep asking and I will try to remember how exactly we did it.. Note that some of the links I provide are from the Japanese homepage (I am based in Tokyo ), but you may find the same info on the English homepage, also HPs homepage is not necessarily intuitive ;-). The whole setup should ideally take 2-4 hours if you concentrate on the points mentioned above, otherwise it might easily take 3-5 days. Good luck, keep asking when you get stuck (or better before ;-) You can also see some of my installation notes at my homepage below. Best regards Nils Valentin Tokyo / Japan http://www.be-known-online.com > > Hi > > We, a research group conducting some research on VOIP, QoS, secured > connections, SCPS for satellite communication links seek to purchase a > few stable and powerful Intel-based servers for conducting our field > trials. The potential servers that we are looking for should be able to > satisfy the following two major requirements. > > 1. Ability to run on Linux 2.6.10, 2.6.12 kernels without any hardware > or driver problems > 2. Ability to work with Digium TE411P ISDN (this comes with on board > echo cancellation) and asterix. In fact this is a serious issue for us > as it does not compatible with our existing prototype server which we > were told would be compatible with Digium TE411P ISDN card . > > After surveying in the Internet we have tentatively decided that IBM > xSeries 336 , HP DL360G4 and ASUS AP2400R U1 would be a potential > servers working with a suitable Linux flavour. Since we have not found > any incompatibility issues with Debian linux we are forwarding this > request asking your opinion. > > Is there anyone who faced problems in getting Debian linux working with > any of the above servers. Pls. let us know if there are any known issues > related to these servers working with Debian Linux Kernel 2.6.10 . > More importantly we would like to find out if there are any known > problems of these servers when working with Digium TE411P ISDN card > under Debian linux . > > > Thank you. > > Ravindra > > > > -------------------------------------------------------------------------- > This email and any attachments may be confidential. They may contain > legally > privileged information or copyright material. You should not read, copy, > use or disclose them without authorisation. If you are not an intended > recipient, please contact us at once by return email and then delete both > messages. We do not accept liability in connection with computer virus, > data corruption, delay, interruption, unauthorised access or unauthorised > amendment. This notice should not be removed. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
