Henrique de Moraes Holschuh wrote:
> On Mon, 29 Aug 2005, Dirk wrote:
>
>>I would like to know If anyone can write CD's/DVD's with kernels newer
>>than 2.6.8 without problems?!
>
>
> Sure.
>
> Without a lspci, hdparm /dev/<burner> and a bit more information, it gets
> difficult to know why you cannot, btw.
>
Sure.. here it is..
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a33 (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 8164
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at <ignored> (64-bit, non-prefetchable)
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
(prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: cfe00000-cfefffff
Prefetchable memory behind bridge: d0000000-dfefffff
Capabilities: [b0] #0d [0000]
0000:00:02.0 PCI bridge: ATI Technologies Inc: Unknown device 5a34
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Capabilities: [50] Power Management version 3
Capabilities: [58] #10 [0041]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] #08 [a803]
0000:00:19.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: cff00000-cfffffff
Prefetchable memory behind bridge: dff00000-dfffffff
Secondary status: SERR
Capabilities: [c0] #08 [a803]
0000:00:1c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8056
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at cfdfc000 (32-bit, non-prefetchable) [size=4K]
0000:00:1c.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8056
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at cfdfd000 (32-bit, non-prefetchable) [size=4K]
0000:00:1c.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8056
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
Memory at cfdfe000 (32-bit, non-prefetchable) [size=4K]
0000:00:1c.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
(prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8056
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at cfdffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2090]
0000:00:1e.0 ISA bridge: ALi Corporation: Unknown device 1573 (rev 31)
Subsystem: Asustek Computer, Inc.: Unknown device 8056
Flags: bus master, medium devsel, latency 0
0000:00:1e.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
Subsystem: Asustek Computer, Inc.: Unknown device 8056
Flags: medium devsel
0000:00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c7) (prog-if
8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 8056
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
I/O ports at ff00 [size=16]
Capabilities: [60] Power Management version 2
0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown
device 5a41 (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8164
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=128M]
I/O ports at b000 [size=256]
Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d8000000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
0000:03:11.0 Multimedia audio controller: C-Media Electronics Inc CM8738
(rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at e800 [size=256]
Capabilities: [c0] Power Management version 2
0000:03:12.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at dfffe000 (32-bit, prefetchable) [size=4K]
0000:03:12.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at dffff000 (32-bit, prefetchable) [size=4K]
0000:03:14.0 Ethernet controller: Marvell Technology Group Ltd. Yukon
Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 811a
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at cfffc000 (32-bit, non-prefetchable) [size=16K]
I/O ports at e400 [size=256]
Expansion ROM at dff00000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
0000:03:15.0 Multimedia controller: Philips Semiconductors SAA7133
Audio+video broadcast decoder (rev d0)
Subsystem: Asustek Computer, Inc.: Unknown device 8170
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at cfffb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
/dev/dvd:
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
/dev/dvd:
Model=PLEXTOR DVDR PX-712A, FwRev=1.05, SerialNo=311095
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no
* signifies the current active mode
---------------------------------------------------------------------------
I thought that (since 2.6.8) it is a common problem that ppl can't burn
stuff with cdrecord anymore...
I was told to try/use dvdrecord instead of cdrecord...
Dirk
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
